Brother HL-L2360DW user manual

The blinking WiFi light on your Brother printer indicates that the printer is either in the process of connecting to a wireless network or is experiencing a connection issue. Here are a few possible reasons for the blinking WiFi light:
1. Initial Setup: If the printer is newly installed or being configured for the first time, the blinking WiFi light indicates that the printer is in the process of connecting to a wireless network. Once the connection is established, the light will become steady.
2. Network Connection Issue: If the printer was previously connected to a wireless network but is now experiencing a connection issue, the WiFi light may blink to indicate that it is unable to establish or maintain a connection. This could be due to a change in network settings, signal interference, or an issue with the printer's network adapter.
3. Insufficient Signal Strength: If the WiFi light is blinking, it could indicate that the printer is receiving a weak signal from the wireless network. This might be caused by the printer being too far from the router or obstacles blocking the signal.
To troubleshoot the blinking WiFi light on your Brother printer, you can try the following steps:
1. Check Network Settings: Ensure that the printer is connected to the correct wireless network and that the network settings are correctly entered. Verify the network name (SSID) and password (security key) entered in the printer's settings.
2. Network Reset: If the printer is not connecting to any wireless network, you can try resetting the printer's network settings. In the printer's settings menu, navigate to the network or wireless settings and choose the option to reset the network.
3. Network Signal Strength: Ensure that the printer is within the range of the wireless router. Move the printer closer to the router to strengthen the signal and see if the WiFi light stops blinking.
4. Restart Router and Printer: Sometimes, restarting both the router and the printer can resolve connection issues. Turn off the printer and unplug the router from the power source, then wait for a few minutes before turning them back on.
5. Update Firmware: Ensure that the printer's firmware is up to date. Visit the Brother support website, enter your printer model, and download the latest firmware if available.
If none of these steps resolve the issue, you may need to contact Brother customer support for further assistance.