Braun SERIES-3-3040S user manual

To reset a Braun Series 3 shaver follow the steps below:
1. Ensure that the shaver is switched off.
. Press and hold the on/off switch for about 5 seconds.
3. Once the reset is complete, the shaver will automatically turn back on.
You will need to reset the shaver when the cleaning indicator or replacement part indicator blinks, even after you have changed the shaver foil or cleaning cartridge.

To clean your Braun Series 3 3040s, follow these steps:
1. Turn off the shaver and unplug it from the power source.
. Press the release button on the front of the shaver head to remove it from the handle.
3. Rinse the shaver head under warm running water to remove loose hairs and debris.
4. You can also use the provided cleaning brush to remove any remaining hairs or dirt from the cutting elements.
5. If you want a more thorough cleaning, apply a few drops of liquid soap to the shaver head and use your fingers to gently work it into the bristles and blades.
6. Rinse the shaver head again under warm running water to remove all the soap.
7. Shake off any excess water and allow the shaver head to air dry completely before attaching it back to the handle.
8. While the shaver head is drying, you can also clean the handle using a damp cloth, being careful not to get any water into the charging port or power button.
9. It is recommended to clean your Braun Series 3 3040s after each use to maintain optimal performance and hygiene.

The lights on a Braun shaver can vary depending on the specific model, but here are some common light indicators and what they typically mean:
1. Charging Indicator: A blinking or solid light indicates that the shaver is being charged.
2. Battery Level Indicator: Some models have a series of lights that show the current battery level, typically ranging from low to full charge.
3. Cleaning Indicator: This light typically alerts you when the shaver needs cleaning or when the cleaning mode is activated.
4. Replacement Indicator: Some models have a light that indicates when it's time to replace the shaver foil or cleaning cassette.
5. Travel Lock Indicator: Many Braun shavers have a lock feature to prevent accidental activation during travel. This light indicates whether the travel lock is activated or deactivated.
It is essential to consult the user manual specific to your Braun shaver model for accurate information about the lights and their meanings.

The blinking light on your Braun Series 3-3040s could indicate several things:
1. Low battery: If the light is blinking red, it means that the battery is running low and needs to be recharged.
2. Charging: When you connect the shaver to the power cord, the blinking light indicates that the device is being charged. Once fully charged, the light will stop blinking.
3. Cleaning reminder: If the blinking light is yellow, it might be a cleaning reminder. The Series 3-3040s has a Clean&Charge station (not included) that automatically cleans and lubricates the shaver. The yellow light is a reminder to clean the shaver using the station.
If the blinking light persists and you are unsure of the reason, it is recommended to consult the user manual or contact Braun customer support for assistance.