Boss BE7ACP-FT user manual

Boss Radio seems to refer to a specific radio station, not an app or device where you can set other stations. However, if you are looking to listen to the Boss Radio station on your device, here is what you can do:
1. Online: Simply put 'Boss Radio' into your internet search engine and it should show you websites where you can listen to it online, such as liveonlineradio.net. Click on the website and then click 'play'.
2. Traditional Radio: If you're trying to tune into Boss Radio on a traditional radio in your area, you'll need to know their frequency. This can usually be found via internet search ('Boss Radio FM frequency'). From there, simply tune your radio to that frequency.
However, if you're referring to a specific device or app that is called "Boss Radio", please specify it. The instructions might be different.

To reset your Boss Bluetooth device, you can follow these general steps:
1. Turn off the Boss Bluetooth device by pressing and holding the power button until it powers off.
2. Delete the device from your Bluetooth settings on your phone or other connected devices. This step may vary depending on your specific device, but usually involves going into the Bluetooth settings, selecting the Boss device, and choosing "Forget" or "Delete" option.
3. On the Boss Bluetooth device, locate the reset button or switch. This might be a small pinhole, a tiny button, or a combination of buttons. Refer to the user manual of your specific Boss Bluetooth device to find the exact location of the reset button or switch.
4. Use a paperclip, pin, or any small pointed object to press and hold the reset button for a few seconds. You may need to hold it for around 10-15 seconds, but this can vary depending on the device.
5. Release the reset button and turn on the Boss Bluetooth device by pressing the power button.
6. Put the Boss Bluetooth device into pairing mode. This usually involves holding down the Bluetooth button until you see indicator lights flashing or it announces it is in pairing mode. Consult the user manual for your specific Boss Bluetooth device to learn the correct process for entering pairing mode.
7. Once the device is in pairing mode, reconnect it to your phone or other devices by going into the Bluetooth settings and selecting the Boss Bluetooth device from the available devices list.
If you encounter any difficulties or if the specific steps mentioned above don't apply to your Boss Bluetooth device, it's recommended to refer to the user manual or contact the Boss support team for further assistance.