Bose SOUNDSPORT-FREE user manual

No, the Bose SoundSport Free earbuds are not waterproof and should not be submerged in water. While they are designed to be resistant to sweat and moisture, they are not intended for use in water activities such as showers or swimming.

To control Bose Soundsport earbuds, you can use the inline remote located on the right earbud cable. The controls and functions are as follows:
1. Volume Up/Down: Press the upper (Volume Up) or lower (Volume Down) button to adjust the volume levels.
2. Play/Pause: Press the middle button once to play or pause your audio.
3. Skip Forward/Backward: To skip to the next track, press and hold the upper button. To skip to the previous track, press and hold the lower button.
4. Answer/End Phone Calls: To answer an incoming call, press the middle button once. To end a call, press the button again.
5. Decline Phone Call: To decline an incoming call, press and hold the middle button for about two seconds, then release.
6. Activate Voice Assistant: Depending on your smartphone's compatibility, you may be able to access the voice assistant by pressing and holding the middle button until it activates. This allows you to ask questions or perform various tasks using voice commands.
Note: The specific functions and compatibility may vary slightly depending on the model and version of the Bose Soundsport earbuds you are using.

To reset your Bose Soundsport Free wireless earbuds, you can follow these steps:
1. Place both earbuds in the charging case and ensure they are charging.
. Close the lid of the charging case and wait for 30 seconds.
3. Open the lid of the charging case and remove both earbuds.
4. Press and hold the Bluetooth button on both earbuds for about 10 seconds until the LED indicators on the earbuds turn solid white, then release the buttons.
5. Once the earbuds are reset, they will power off automatically.
6. Now, you can pair them again with your devices.
Note: Resetting the earbuds will delete all saved connections and settings, so you will need to repair them with your devices after the reset process.