Bose SOUNDDOCK-10 user manual

To reset your Bose SoundDock 10, follow these steps:
1. Disconnect the power cord from the back of the SoundDock 10.
. Remove any connected devices and accessories from the SoundDock.
3. Wait for about 30 seconds.
4. Reconnect the power cord to the SoundDock 10.
5. Press and hold the "Volume minus" button and "Aux" button simultaneously for about 10 seconds.
6. Release the buttons when you see the system information displayed on the display screen.
7. Your SoundDock 10 should now be reset to its factory settings.
Note: Resetting your Bose SoundDock 10 will erase any preferences or settings you have set previously.

There could be several reasons why your Bose SoundDock 10 is not working. Here are some common troubleshooting steps you can try:
1. Check the power source: Ensure that the SoundDock is properly plugged into a working electrical outlet and that the power cord is securely connected to the device.
2. Check the power switch: Make sure that the power switch on the back of the SoundDock is turned on.
3. Examine the connections: Ensure that the docking connector on the SoundDock and your audio device (such as an iPhone or iPod) are clean and free from any debris. Also, check if the docking connector is properly aligned.
4. Try a different audio source: Connect a different audio device to the SoundDock and see if it works. This will help determine if the issue is with the SoundDock or your specific audio device.
5. Test with different cables: If possible, try using a different audio cable to connect your device to the SoundDock. This will help identify if the problem lies with the cable.
6. Perform a reset: Disconnect the power from the SoundDock, wait for a few seconds, and then reconnect it. This can sometimes resolve temporary issues.
7. Check for firmware updates: Visit the Bose website and check if there are any firmware updates available for your SoundDock 10. Updating the firmware can address any software-related issues.
If none of these steps resolve the problem, it may be necessary to contact Bose customer support for further assistance or consider taking your SoundDock to an authorized service center for repair.

To use your Bose SoundDock 10 without a remote, you can follow these steps:
1. Check if your SoundDock 10 has any physical buttons on the top or front panel. These buttons may include power, volume control, and source selection. If present, you can use these buttons to control basic functions.
2. Connect your music device, such as a smartphone or MP3 player, to the SoundDock 10 using the appropriate cable. Depending on your music device, you may need to use a 3.5mm auxiliary cable or an iPhone/iPod dock connector.
3. Once your device is connected, ensure it is playing audio. You can control the playback, volume, and track selection directly from your music device.
Note: Some Bluetooth-enabled SoundDock 10 models may allow you to connect and control audio wirelessly using Bluetooth. If your model supports Bluetooth, follow the instructions in the product manual for pairing and connecting devices.
If your SoundDock 10 doesn't have any physical buttons and there is no remote available, it may be challenging to control advanced functions such as selecting different sources or adjusting specific settings. In such cases, we recommend contacting Bose customer support or referring to the product manual for further assistance.

To connect your Bose SoundDock 10, follow these steps:
1. Power on the SoundDock and make sure it is plugged into a power outlet.
. Locate the dock connector on the front of the SoundDock 10 and remove any protective coverings if present.
3. Depending on your device, you have two possible options for connecting:
a. If you have an iPhone or iPod with a 30-pin dock connector:
- Connect your iPhone or iPod to the dock connector on the SoundDock. Make sure the dock connector is fully inserted and secure.
- If necessary, adjust the dock adapter to fit your specific device.
- Once connected, your device should start charging and the SoundDock should display the device's name.

b. If you have a device with a Lightning connector (such as newer iPhones or iPods), or if you have an Android device:
- Ensure the SoundDock is updated to the latest firmware by visiting the Bose website and following any available instructions.
- Connect your device to the SoundDock using a compatible audio cable or adapter.
- Plug one end of the cable into the audio output/headphone jack on your device and the other end into the auxiliary input jack on the back of the SoundDock.
- Once connected, set the SoundDock's source to "AUX" mode using the remote or buttons on the front panel.
4. Adjust the volume on your device and the SoundDock to the desired level.
5. You should now be able to play audio through your Bose SoundDock 10. If you experience any issues, consult the SoundDock's user manual or contact Bose customer support for further assistance.