Bose SOUNDBAR-700 user manual

To get the best sound from your Bose Soundbar 700, follow these tips:
1. Placement:
- Place the soundbar at ear level, preferably on a shelf or mounted on the wall. Avoid placing it inside a cabinet or too close to other objects that can obstruct the sound.
- Ensure that the soundbar is centered and aligned with your TV.
2. Wiring:
- Connect the soundbar to your TV using an HDMI ARC (Audio Return Channel) cable. This will allow for a simpler setup and better sound quality.
- Use high-quality HDMI cables to ensure the best audio transmission.
3. Room Acoustics:
- Consider the room's dimensions and furniture placement. Avoid too many hard surfaces that can cause sound reflections and echoes.
- If possible, add rugs, curtains, or acoustic panels to help absorb sound reflections and improve the overall audio experience.
4. Room Calibration:
- Use the Bose Music app to calibrate the soundbar according to your room's acoustics. This will optimize the audio based on the room's specific characteristics.
- Follow the instructions in the app to set up the ADAPTiQ audio calibration system, which takes measurements and adjusts the soundbar accordingly.
5. Sound Modes:
- Experiment with different sound modes offered by the soundbar, such as "Movie," "Music," or "Night Mode," to find the one that best suits your preferences and content type.
- Customize the sound settings according to your individual taste using the app's equalizer controls.
6. Software Updates:
- Ensure that your soundbar's software is up to date by regularly checking for updates in the Bose Music app. Updates often bring improvements and new features that can enhance the sound performance.
7. Adjustments and Volume:
- Use the soundbar's remote or the Bose Music app to adjust the volume and make small volume adjustments as needed.
- Avoid excessive volume levels to prevent distortion and potential damage to the speakers.
By following these tips, you'll be able to maximize the sound quality and enjoy an immersive audio experience with your Bose Soundbar 700.

There could be several reasons why your Bose Soundbar 700 is not connecting to your TV. Here are some potential solutions:
1. Ensure compatibility: Make sure that your TV is compatible with the Bose Soundbar 700. It should have an HDMI-ARC (Audio Return Channel) port or an optical audio output to connect the soundbar.
2. Check cables and connections: Confirm that you have properly connected the soundbar to the TV using the appropriate cables. Ensure that the cables are securely plugged in and not damaged.
3. Configure TV settings: In some cases, you may need to adjust your TV's audio settings to properly connect to the soundbar. Check your TV's audio output settings and make sure it is set to either HDMI-ARC or optical, depending on which connection you are using.
4. Update firmware: Ensure that your Bose Soundbar 700 has the latest firmware installed. You can do this by checking for firmware updates through the Bose Music app or the Bose website.
5. Power cycle devices: Try turning off both the TV and the soundbar, unplugging them from the power source, and then plugging them back in after a few minutes. This can help resolve any temporary connection issues.
6. Reset soundbar: If none of the above steps work, you can try resetting the soundbar to its factory settings. Refer to the user manual or contact Bose customer support for instructions on how to do this.
If you have tried these steps and still cannot connect your Bose Soundbar 700 to your TV, it may be helpful to reach out to Bose customer support for further assistance.