Bose CINEMATE-SERIES-II user manual

Unfortunately, we have bad news for you. The Bose Cinemate Series II cannot be used without a remote. This home theater system has minimal buttons on the main speaker, primarily for setup. All other functionality, including volume adjustment, turning it on and off, or changing modes, requires using the proprietary infrared remote control. If you lost your remote, your best bet is to replace it. Consider reaching out to the Bose's customer service or purchase one from an online marketplace.

Yes, a universal remote should work with the Bose Cinemate Series II. The Bose Cinemate uses an infrared remote control, and most universal remotes are compatible with infrared devices. You may need to program the universal remote with the necessary codes for the Bose Cinemate, which can usually be found in the universal remote's instruction manual or by searching online.

There could be various reasons why your Bose Cinemate is not working. Here are a few troubleshooting steps you can try:
1. Ensure that all the cables are securely connected. Check if the power cable is plugged in, the audio inputs are connected properly, and the speaker connections are secure.
2. Make sure the power source is working. Check if the power outlet is functioning by plugging in another device.
3. Check the volume settings. Ensure that the volume on the Cinemate system and your audio source (TV, DVD player, etc.) is turned up and not muted.
4. Restart the system. Sometimes, turning your Bose Cinemate off and on again can resolve minor issues. Unplug the power cord from the back of the system, wait for a few seconds, and then plug it back in.
5. Test with another audio source. Try connecting a different audio source, like a smartphone or another DVD player, to determine if the issue is with the Bose Cinemate or the original audio source.
6. Update the firmware (if available). Visit the Bose website and check if there are any available firmware updates for your specific model. Updating the firmware can sometimes fix software-related issues.
7. Reset the system. Consult the user manual or Bose support to find instructions on how to perform a factory reset on your Bose Cinemate. This can help resolve any software issues.
If none of these troubleshooting steps resolves the issue, it may be a hardware problem, and you should consider contacting Bose customer support or taking it to an authorized service center for further assistance.

To set up your Bose Cinemate Series II, follow these steps:
1. Unpack all the components: You should have a soundbar, an Acoustimass module, a remote control, two speaker cables, an audio cable, and a power cord.
2. Find a suitable location: Place the soundbar under your TV, either on a shelf or mounted on the wall. The Acoustimass module can be placed anywhere in the room, as it is wireless. It's recommended to place it on the floor for optimal sound distribution.
3. Connect the components:
- Connect one end of the audio cable to the "Audio Out" jack on your TV, and the other end to the "Audio In" jack on the soundbar.
- Connect the Acoustimass module to a power outlet using the power cord.
- Connect one end of each speaker cable to the corresponding jacks on the Acoustimass module, and the other end to the soundbar.
4. Plug in the power cords: Connect the power cord for the soundbar and the Acoustimass module to a power outlet.
5. Turn on your devices: Power on your TV and ensure that the volume is set to a reasonable level. Also, ensure that the soundbar and Acoustimass module power indicators are lit.
6. Test the audio: Use the remote control to test the audio. Adjust the volume and check whether the sound is coming from the soundbar and Acoustimass module.
7. Make any necessary adjustments: Use the remote control to adjust the bass level, sound modes, and other settings according to your preferences.
That's it! You have successfully set up your Bose Cinemate Series II. Enjoy your immersive sound experience!