Bose 3-2-1-GS-SERIES-III user manual

The Bose 321 system was first released in 2001.

The Bose 3-2-1 GS Series III system has a total power output of 200 watts.

To adjust the bass on your Bose 3 2 1 system, you can follow these steps:
1. Turn on your Bose 3 2 1 system and select the appropriate input source (TV, DVD, etc.).
2. On the remote control, locate the "Bass" button. It is typically labeled with a symbol that looks like a musical note.
3. Press the "Bass" button to access the bass adjustment feature.
4. Using the arrow or volume control buttons on the remote control, you can increase or decrease the bass level according to your preference. Adjust the level until you achieve the desired bass response.
5. When you are satisfied with the bass level, press the "Bass" button again to exit the adjustment mode.
Note: The specific steps and buttons might vary based on the particular model of the Bose 3 2 1 system you own. If you are unable to locate the bass adjustment button or experience any difficulties, consult the user manual for your specific model or reach out to Bose customer support for assistance.

To use the optical audio on your Bose 3-2-1-GS Series III system, follow these steps:
1. Make sure that the optical cable is properly connected to the optical audio input on the back of the Bose 3-2-1-GS Series III system. The optical audio input port is usually labeled as "OPTICAL IN."
. Connect the other end of the optical cable to the corresponding optical audio output port on your audio source device, such as a TV, DVD player, or gaming console. This port is typically labeled as "OPTICAL OUT" on your audio source.
3. Turn on your Bose 3-2-1-GS Series III system and your audio source device.
4. On the Bose remote control, press the "CD/DVD" or "AUX" button, depending on which input you have connected to the optical audio. If you're using the CD/DVD input, set the Bose system to "DVD" mode to use the optical audio. If you're using the AUX input, set the Bose system to "AUX" mode.
5. Adjust the volume on your Bose system and audio source device to your desired levels.
6. The optical audio should now be playing through your Bose 3-2-1-GS Series III system.
Note: Some audio source devices or TVs may require you to change the audio output settings to use the optical audio output instead of the regular audio output. Refer to your audio source device's user manual for instructions on how to change the audio output settings.