Bosch SHEM3AY55N user manual

There could be several reasons why your Bosch dishwasher is not starting. Here are some troubleshooting steps you can try:
1. Check the power supply: Make sure the dishwasher is properly plugged into a functioning outlet. If it is plugged in, try plugging in another device to ensure the outlet is working.
2. Check the door latch: Ensure that the dishwasher door is fully closed and latched properly. If the door is not closing properly, the dishwasher will not start.
3. Check the control panel: Inspect the control panel for any error codes or indicators that may be displayed. Refer to the dishwasher's manual for information on what the error codes mean and how to resolve them.
4. Check the water supply: Make sure the water supply valve under the sink is fully open. If the dishwasher does not detect a sufficient water supply, it will not start.
5. Check for a tripped circuit breaker: If the dishwasher is not receiving power, check the circuit breaker in your electrical panel to see if it has tripped. If it has, reset it and try again.
6. Check the float switch: It is possible that the float switch, which detects the water level, is stuck or malfunctioning. Look for any visible debris or blockages around the float and clean it if necessary.
7. Check for a clogged or blocked drain: If the dishwasher is not draining properly, it may prevent the dishwasher from starting. Check the drain hose and ensure it is not clogged or kinked. Clean or unclog the drain if necessary.
If none of these steps resolve the issue, it might be a malfunctioning component within the dishwasher itself. In such cases, it is advisable to contact a professional technician or the Bosch customer service for further assistance.

The Extra Dry and Sanitize options on a Bosch dishwasher refer to different settings that are designed to enhance the machine's regular washing and drying cycles.
1. Extra Dry: This option is to improve the drying results of your dishwasher. It increases the temperature during the final rinse cycle and extends the drying time to further enhance drying results.
2. Sanitize: This option, on the other hand, increases the temperature of the final rinse to a point where it kills off nearly 99.9% of bacteria. This can be helpful in households where people have allergies or weak immune systems.
Remember, the sanitize option doesn't necessarily improve the drying capabilities. It’s more about hygiene while Extra dry is about better drying performance.

If your Bosch dishwasher is not working properly and you need to reset it, follow these steps:
1. Turn off the dishwasher: Locate the power button on the control panel and press it to turn off the dishwasher. Wait for about 10 seconds.
2. Turn off the circuit breaker: Locate the circuit breaker that supplies power to the dishwasher in your electrical panel. Turn it off by flipping the corresponding switch to the off position. Wait for about 10 seconds before turning it back on.
3. Turn on the dishwasher: After the circuit breaker is reset, turn on the dishwasher by pressing the power button on the control panel.
4. Start a new cycle: Select a new cycle and start the dishwasher. Check if the reset has resolved the issue. If not, you may need to consult the appliance manual or contact Bosch customer service for further assistance.
Please note that the reset process may vary slightly depending on the specific model of your Bosch dishwasher. Consult the appliance manual for detailed instructions if necessary.

The hose on the side of your Bosch dishwasher is likely the drain hose. It is used to remove the wastewater from the dishwasher during the drain cycle.