Bosch PIE651BB1E user manual

To reset your Bosch PIE651BB1E cooktop, you can follow these steps:
1. Turn off the power: Make sure the cooktop is not connected to the power supply. You can either unplug the power cord or shut off the circuit breaker.
2. Wait for a few minutes: Leave the cooktop disconnected from power for a few minutes. This pause will allow the internal components to reset.
3. Reconnect the power: Plug the cooktop back into the power outlet or turn on the circuit breaker to restore power.
4. Test the cooktop: Turn on the cooktop and check if it is functioning normally. If the reset was successful, it should work properly.

The key symbol on a Bosch induction hob represents the key lock function. This function is used to lock or unlock the control panel of the hob, preventing accidental changes to the settings or turning it on/off. When the key symbol is displayed, it means that the control panel is locked, and you need to unlock it before you can use the hob. The process of unlocking may vary depending on the specific model, so it is advisable to refer to the user manual for detailed instructions.

There could be several reasons why your Bosch induction hob won't turn on. Here are a few possible explanations:
1. Power supply issues: Make sure the hob is properly connected to a power source and that the power outlet is functional. Check the circuit breaker or fuse box to ensure there is power reaching the hob.
2. Safety features: Some induction hobs have built-in safety features that may prevent them from turning on. For example, there may be a child lock feature that needs to be disabled before the hob will operate.
3. Controls and settings: Check that the controls and settings are correctly adjusted. Make sure you are using the correct power level or zone selection for the hob to start heating.
4. Faulty connection or wiring: Inspect the hob's wiring and connections for any loose or damaged parts that may be preventing it from turning on. If you suspect a faulty connection, it's best to consult a professional technician to avoid any risks.
5. Technical issues: There may be a fault or malfunction with the hob itself, such as a defective control board or internal component. If none of the above solutions work, it is advisable to contact Bosch customer service or a qualified technician for further assistance or repairs.