Bosch INDEGO-800 user manual

To reset your Bosch Indego robot lawnmower, follow these steps:
1. Turn off the Indego by pressing the "Power" button located on top of the device.
. Disconnect the power supply from the charging station and remove the robot from the docking station.
3. Turn the robot lawnmower upside down, so that the wheels are facing upwards.
4. Locate the reset button on the underside of the device. It is a small hole marked with the word "Reset."
5. Use a small, pointed object (such as a paperclip or a pin) to press and hold the reset button for approximately 5 seconds.
6. Release the reset button.
7. Turn the Indego back over and place it back on the docking station.
8. Reconnect the power supply to the charging station.
9. Wait for the Indego to start up and initialize. This process may take a few minutes and the mower may move slightly during start-up.
10. Once the initialization is complete, the Indego should be reset to its factory settings.
Note: Resetting the Bosch Indego will erase all settings and data, including mowing schedules, zone configurations, and personalized settings, so you may need to reconfigure them after the reset.