BlueParrott B450-XT user manual

If your BlueParrott B450-XT headset is frozen or unresponsive, you can try the following steps to unfreeze it:
1. Turn off the headset: Press and hold the power button until you hear "power off" or the headset indicator turns off.
. Reset the headset: Locate the reset button on the headset. It is usually a small hole labeled "Reset." Use a paperclip or similar object to press and hold the reset button for about 10 seconds.
3. Charge the headset: Connect the headset to a power source using the included USB cable and allow it to charge for at least 30 minutes. Make sure the charging cable is securely connected to the headset.
4. Turn on the headset: After charging, press and hold the power button until you hear "power on" or see the headset indicator light up.
5. Test functionality: Check if the headset has returned to normal functioning. If not, continue to the next step.
6. Update firmware (optional): Visit the BlueParrott website and check for any available firmware updates for your headset model. Follow the instructions provided to update the firmware, which may help resolve any freezing or performance issues.
7. Contact customer support: If the problem persists even after trying the above steps, it may be necessary to contact BlueParrott customer support for further assistance.
Remember, these steps are general guidelines, and if there are specific instructions provided by BlueParrott for your headset model, it's recommended to follow those.

The red light flashing on your BlueParrott B450-XT headset typically signifies that the battery is low. It's recommended to charge the headset when you see the red light flashing to prevent any interruptions during use.

The BlueParrott button on the B450-XT can be customized to enable a range of functionalities. You can set it to speed dial, mute/unmute calls, or launch a specific app among others. It can also be used to activate voice-controlled apps like Google Assistant or Siri. This feature can be personalized through the BlueParrott app.

The MFB button on the BlueParrott B450-XT headset stands for Multi-Function Button. This button allows you to perform various actions such as power on/off, answer or end calls, and control other functions depending on the specific mode of the headset. You can use the manufacturer's instructions or the headset's user manual for detailed information on all the functions and how to use them.