Blomberg WM-72200-W user manual

To use the drying function on a Blomberg washer dryer, follow these steps:
1. Load your laundry into the washing machine drum as you would for a regular wash cycle.
2. Add detergent and set the desired wash cycle and temperature for your laundry. Skip the fabric softener if you want to dry only.
3. Once you have selected the appropriate washing settings, locate the drying options. On most Blomberg models, there will be a separate drying button or dial.
4. Press the drying button or turn the dial to select the desired drying program. Blomberg washer dryers usually offer various drying options such as time-based drying, sensor drying, or steam refresh.
5. If your Blomberg washer dryer has a sensor drying feature, it will automatically measure the moisture content in the laundry and adjust the drying time accordingly. In such cases, the machine will stop when the clothes are dry.
6. Alternatively, if your machine has a time-based drying option, you will need to manually set the drying time using the control panel.
7. Once you have selected the appropriate drying program or time, press the start button to begin the drying cycle.
8. The machine will now start drying your laundry according to your selected settings. Make sure to monitor the progress or dryer display for any updates.
9. After the drying cycle is complete, remove your dry laundry from the drum.
Remember, the specific steps may vary depending on the model of your Blomberg washer dryer, so it's always best to refer to the manufacturer's instructions manual for detailed guidance on using the drying function.

To reset your Blomberg WM-72200-W washing machine, you can follow these steps:
1. Make sure the washing machine is powered on by plugging it into a working electrical outlet.
2. Press the Power button to turn off the machine.
3. Unplug the washing machine from the power outlet, and wait for approximately 1 minute.
4. Plug the machine back into the power outlet.
5. Press and hold the Start/Pause button for about 5 seconds until you hear a beep or see the display screen flash.
6. Release the Start/Pause button.
7. The washing machine should now be reset to its default factory settings.
Note: The exact reset procedure may vary depending on the specific model of your Blomberg washing machine. It is recommended to refer to the user manual for accurate instructions or contact Blomberg's customer support for further assistance.

The voltage of the Blomberg WM-72200-W washer is 220-240 volts.

There could be several reasons why your Blomberg washing machine is not working. Here are some common issues:
1. Power supply: Ensure that the washing machine is properly plugged in and getting electricity. Check the outlet, the power cord, and any fuses or circuit breakers related to the machine.
2. Door/lid not closed properly: If the door or lid of your washing machine is not closed properly, it may not start. Make sure it is securely closed and latched.
3. Water supply: Confirm that the water supply is connected and turned on. Check the hoses and valves for any blockages or damage.
4. Drainage: If there is a problem with the drainage system, the machine may not start. Ensure that the drain hose is not blocked and is connected properly to the drain outlet.
5. Program selection: Double-check that you have selected the correct program for your laundry needs. Certain programs may have different settings that need to be adjusted.
6. Error codes: If your Blomberg washing machine displays an error code, consult the user manual to decipher the meaning and recommended actions. Error codes can indicate specific issues that need to be addressed.
7. Maintenance: Regular cleaning and maintenance are crucial for the efficient functioning of a washing machine. If you haven't cleaned the filter or performed other routine maintenance tasks, it could lead to problems. Refer to the user manual for instructions on how to clean and maintain your specific model.
If none of these steps resolve the issue, it is advisable to contact Blomberg customer support or a qualified technician for further assistance.