Bissell SYMPHONY-1132A user manual

To fill a Bissell Symphony pet product, please follow these steps:
1. Turn off the machine and unplug it from the power source.
. Locate the clean water tank on the top front of the machine and remove it by lifting the handle.
3. Unscrew the fill cap on the clean water tank counterclockwise to open it.
4. Fill the tank with warm tap water up to the desired level. Do not overfill.
5. Add the recommended Bissell Symphony Hard Floor Cleaning Formula into the tank following the instructions on the bottle. Be sure to use the formula specifically designed for the Symphony pet model.
6. Place the fill cap back on the clean water tank and screw it on tightly by turning it clockwise.
7. Reinsert the clean water tank back into the machine by aligning the front edge of the tank with the grooves in the machine. Push the tank down until it clicks into place.
8. Ensure that the dirty water tank is empty and properly installed.
9. Plug in the machine and turn it on.
10. You are now ready to use your Bissell Symphony pet for cleaning.
Remember to always refer to the user manual provided with the product for specific instructions and safety guidelines.