Beko WTK62051W user manual

To program your Beko washing machine, follow these steps:
1. Turn on the washing machine by pressing the power button.
. Check if the water supply is connected and turned on.
3. Sort your laundry according to fabric type, color, and care instructions.
4. Open the washing machine door and load the laundry evenly in the drum. Avoid overloading the machine.
5. Close the door properly to ensure it is locked.
6. Turn the program dial to select the desired wash program. The available programs will vary depending on your model, but common options include cotton, synthetics, delicates, wool, quick wash, etc.
7. If needed, adjust the temperature and spin speed using the respective buttons or dials. The appropriate settings depend on your laundry's fabric and care requirements.
8. Optionally, you can add detergent, fabric softener, or any other laundry additives to the dispenser drawers. Follow the recommended dosage for your load size and water hardness.
9. Press the start/pause button to commence the wash cycle. You may also need to press the start button twice, or a similar combination to begin the program, depending on your model.
10. The machine will fill with water and initiate the wash cycle. You can monitor the remaining time on the digital display or progress indicators if available.
11. If necessary, you can pause or cancel the program during the wash cycle by pressing the appropriate button. Follow the manufacturer's instructions for your specific model.
12. After completing the wash and rinse cycles, the machine will automatically go into the spinning phase to remove excess water. The spin speed may depend on the program selected or can be manually adjusted.
13. Once the washing and spinning phases are complete, the machine will display "End" or another indication that the cycle is finished.
14. Open the door and remove your laundry.
15. Clean the filter and drum of the washing machine regularly to maintain its performance and prolong its lifespan.
Remember to refer to your Beko washing machine's user manual for specific instructions and details tailored to your appliance model.

The average lifespan of a Beko washing machine is typically around 7-10 years. However, the actual lifespan can vary depending on factors such as usage, maintenance, and overall care. Regular maintenance and proper usage can help extend the lifespan of the washing machine.

To reset your Beko washing machine, you can try the following steps:
1. Unplug your washing machine from the power outlet.
. Wait for approximately 1 minute to ensure that all power is completely drained from the machine.
3. Plug the washing machine back into the power outlet.
4. Turn the machine on by pressing the power button (usually located on the control panel).
5. Press and hold the Start/Reset button for about 5 seconds until the machine beeps or the display shows signs of reset (such as all the lights flashing).
6. Release the Start/Reset button.
7. Wait for a few seconds for the reset process to complete.
8. Your Beko washing machine should now be reset and ready for use.
If the above steps do not work, it is recommended to consult the user manual for your specific Beko washing machine model. The manual may have specific instructions on how to reset your machine or troubleshooting tips for your specific issue.

There could be several reasons why a Beko washing machine is not spinning:
1. Overloaded drum: If the machine is overloaded with too many clothes, it can cause an imbalance and prevent the drum from spinning properly. Remove some clothes and try again.
2. Unbalanced load: If the load inside the machine is not evenly distributed, it can result in an unbalanced load. This can cause the machine to automatically stop spinning to prevent damage. Try redistributing the items in the drum and restart the spin cycle.
3. Door not fully closed: The machine may not spin if the door is not completely closed or the door latch is faulty. Ensure that the door is properly closed and latched before starting the machine.
4. Motor or belt malfunction: If the motor or belt that drives the drum is faulty or damaged, it can prevent the machine from spinning. In this case, professional repair or replacement of the motor or belt may be required.
5. Blockage in the drainage system: If the water cannot be drained properly due to a clog or blockage in the drainage system, the machine may not spin. Check the drainage hose for any obstructions or kinks and clean it if necessary.
6. Faulty control board: A malfunctioning control board can also prevent the machine from spinning. In this case, it may be necessary to replace the control board or seek professional assistance.
If none of these solutions work, it may be necessary to contact a professional appliance repair technician to diagnose and fix the specific issue with the Beko washing machine.