Beko WTG841B2 user manual

Reprogramming a Beko washing machine involves changing settings, resetting the machine or even using a diagnostic mode, however specific functionalities can vary depending on the model of the machine.
Here is a general guide:
1. Turn off the washing machine and unplug it from the wall.
2. Wait 1-2 minutes so the machine can fully power down.
3. Hold down the Start/Pause button and plug the machine back into the wall, continuing to hold the button for a few seconds.
4. Release the button when the Start/Pause light begins to blink.
5. Press the Start/Pause button again to activate the demo mode. This can be used to test the different components of the machine to ensure they're all working properly.
6. If your machine has a digital display, you can use the up and down buttons to scroll through the different functions and see if any error codes appear.
7. For resetting the machine, usually there is a Reset button or option in the menu provided by the selection dial (and displayed in the LED display). Select reset and press the start/pause button.
Remember every model is different, please refer to your user's manual for specific instructions. If you feel uncomfortable or unsure, you should always reach out to Beko customer service or a professional.
Note: Some complex issues might not get solved by a reset or demo mode check. Those cases might require professional assistance to repair the machine.

To open the filter on a Beko washer dryer (model WTG841B2), you can follow these steps:
1. Turn off the washer dryer and unplug it from the power source for safety.
. Locate the filter access panel, which is usually at the bottom of the front side of the machine.
3. Use a flathead screwdriver or a coin to turn the filter cover counterclockwise.
4. Once the cover is loose, pull it towards you to remove it completely.
5. Inside, you will find the filter. It may be a small handle or a knob that you can pull or twist to remove.
6. Carefully extract the filter and clean any debris or lint trapped in it.
7. Rinse the filter under running water to ensure it is thoroughly cleaned.
8. Once cleaned, place the filter back into its original position.
9. Reattach the filter cover by aligning it with the opening and turning it clockwise until it is secure.
10. Plug in the washer dryer, and it is now ready for use.
Remember to clean the filter regularly to maintain the efficiency of your washer dryer. The frequency of cleaning may vary depending on usage, but it is generally recommended to clean it every 1-3 months or as needed.

Specific instructions can vary depending on the exact model of your Beko washing machine.
In general, this is how you could try to reset the device:
1. Turn off the washing machine and unplug it from the outlet.
. Wait for around 30 minutes.
3. Plug the washing machine back in.
4. Press and hold the Start/Pause button for around 5 seconds.
5. Choose your washing settings and start a cycle as per usual.
If your washing machine is displaying an error code, consider looking it up in the machine's manual or on the Beko website to diagnose the problem. If the issue persists, it may be necessary to contact Beko customer service or a professional repair person.
Note that these instructions might not work perfectly for every Beko model. Refer to your user booklet for model specific instructions.

There could be several reasons why your Beko washing machine is stuck on a cycle:
1. Control board malfunction: The control board is the brain of your washing machine and controls various operations, including the cycle selection. If the control board is faulty or damaged, it may not register your commands to change the cycle or stop the current cycle.
2. Mechanical issue: There may be a mechanical issue with the timer or motor of the washing machine. This can prevent the machine from advancing to the next cycle or stopping the current one.
3. Door interlock problem: Many modern washing machines have a door interlock mechanism that locks the door during a cycle. If the door interlock is faulty or the sensor does not detect that the door is properly closed, the machine may not proceed with a new cycle or allow you to stop the current one.
4. Water supply issues: If the washing machine is not getting enough water or the water pressure is too low, it may not proceed to the next cycle. This is a safety measure to ensure that the machine operates efficiently and does not damage the clothes.
5. Electronic glitch: Sometimes, electronic glitches or power surges can cause the washing machine's programming to get stuck. In such cases, a simple power reset may solve the issue.
It is recommended to consult the user manual of your specific Beko washing machine model for troubleshooting steps. If the issue persists, it may be necessary to contact a professional technician or the manufacturer's customer service for further assistance.