Beko WMB71642-EXCELLENCE user manual

Reprogramming a Beko washing machine involves changing settings, resetting the machine or even using a diagnostic mode, however specific functionalities can vary depending on the model of the machine.
Here is a general guide:
1. Turn off the washing machine and unplug it from the wall.
2. Wait 1-2 minutes so the machine can fully power down.
3. Hold down the Start/Pause button and plug the machine back into the wall, continuing to hold the button for a few seconds.
4. Release the button when the Start/Pause light begins to blink.
5. Press the Start/Pause button again to activate the demo mode. This can be used to test the different components of the machine to ensure they're all working properly.
6. If your machine has a digital display, you can use the up and down buttons to scroll through the different functions and see if any error codes appear.
7. For resetting the machine, usually there is a Reset button or option in the menu provided by the selection dial (and displayed in the LED display). Select reset and press the start/pause button.
Remember every model is different, please refer to your user's manual for specific instructions. If you feel uncomfortable or unsure, you should always reach out to Beko customer service or a professional.
Note: Some complex issues might not get solved by a reset or demo mode check. Those cases might require professional assistance to repair the machine.

There could be a few possible reasons why your Beko washing machine is stuck on the wash cycle:
1. Program selection issue: Make sure that you have selected the correct wash program. Sometimes, users might accidentally start the wrong cycle or the knob/controls might be malfunctioning. Try rotating the program selection knob to a different cycle to see if it starts.
2. Door/lid sensor problem: If your washing machine has a door or lid sensor, it may not be detecting that the door is closed properly. Ensure that the door or lid is securely shut and the sensor is not obstructed or faulty. The machine will not proceed to the next cycle if it does not detect that the door is closed.
3. Water supply issue: Check if the water supply is properly connected and turned on. Insufficient water supply can prevent the machine from advancing to the next cycle.
4. Drainage problem: If the machine isn't able to drain the water from the wash cycle, it might get stuck. Check for any clogs or blockages in the drain hose or pump filter. Cleaning them out may help resolve the issue.
5. Mechanical or electrical malfunction: If none of the above issues seem to be the cause, there may be a mechanical or electrical malfunction. In this case, it would be best to contact Beko customer support or a qualified technician to diagnose and fix the problem.
Remember to refer to your user manual for specific troubleshooting steps related to your Beko washing machine model.

The Beko WMB71642 EXCELLENCE washing machine has several different washing programs, each with varying durations. The time it takes to wash clothes will depend on the selected program, the load size, and the desired settings. Typically, a regular cotton wash program can take around 2-3 hours, while a quick wash program can take around 30-45 minutes. It is recommended to consult the user manual or program guide of the specific model for accurate information on the duration of each wash cycle.

To reset your Beko WMB71642-Excellence washing machine, you can try the following steps:
1. Make sure the washing machine is turned off and unplugged from the power source.
. Wait for approximately 1 minute.
3. Plug the machine back into the power source.
4. Press and hold the "Start/Pause" button for about 5 seconds.
5. While still holding the button, turn on the washing machine.
6. Continue holding the "Start/Pause" button until the indicator lights start flashing or the display shows some response.
7. Release the "Start/Pause" button.
8. Your washing machine should now be reset and ready to use.
Note: The steps mentioned above are general instructions that may apply to most Beko washing machine models. However, minor variations may exist depending on the specific model you own. If these steps do not work, refer to the user manual of your washing machine or contact Beko customer support for further assistance.