Beko WMB-71643-PTS user manual

To program your Beko washing machine, follow these steps:
1. Turn on the washing machine by pressing the power button.
. Check if the water supply is connected and turned on.
3. Sort your laundry according to fabric type, color, and care instructions.
4. Open the washing machine door and load the laundry evenly in the drum. Avoid overloading the machine.
5. Close the door properly to ensure it is locked.
6. Turn the program dial to select the desired wash program. The available programs will vary depending on your model, but common options include cotton, synthetics, delicates, wool, quick wash, etc.
7. If needed, adjust the temperature and spin speed using the respective buttons or dials. The appropriate settings depend on your laundry's fabric and care requirements.
8. Optionally, you can add detergent, fabric softener, or any other laundry additives to the dispenser drawers. Follow the recommended dosage for your load size and water hardness.
9. Press the start/pause button to commence the wash cycle. You may also need to press the start button twice, or a similar combination to begin the program, depending on your model.
10. The machine will fill with water and initiate the wash cycle. You can monitor the remaining time on the digital display or progress indicators if available.
11. If necessary, you can pause or cancel the program during the wash cycle by pressing the appropriate button. Follow the manufacturer's instructions for your specific model.
12. After completing the wash and rinse cycles, the machine will automatically go into the spinning phase to remove excess water. The spin speed may depend on the program selected or can be manually adjusted.
13. Once the washing and spinning phases are complete, the machine will display "End" or another indication that the cycle is finished.
14. Open the door and remove your laundry.
15. Clean the filter and drum of the washing machine regularly to maintain its performance and prolong its lifespan.
Remember to refer to your Beko washing machine's user manual for specific instructions and details tailored to your appliance model.

To reset your Beko washing machine, you can try the following steps:
1. Unplug your washing machine from the power outlet.
. Wait for approximately 1 minute to ensure that all power is completely drained from the machine.
3. Plug the washing machine back into the power outlet.
4. Turn the machine on by pressing the power button (usually located on the control panel).
5. Press and hold the Start/Reset button for about 5 seconds until the machine beeps or the display shows signs of reset (such as all the lights flashing).
6. Release the Start/Reset button.
7. Wait for a few seconds for the reset process to complete.
8. Your Beko washing machine should now be reset and ready for use.
If the above steps do not work, it is recommended to consult the user manual for your specific Beko washing machine model. The manual may have specific instructions on how to reset your machine or troubleshooting tips for your specific issue.

The Beko WMB-71643-PTS washing machine's drum clean cycle typically takes around 1 to 1.5 hours to complete. However, please note that the duration may vary depending on the specific settings and conditions.

The Beko WMB-71643-PTS washing machine has multiple spin settings that can be adjusted based on your laundry needs. These spin settings are as follows:
1. No Spin: This setting does not involve any spinning. It can be used for very delicate fabrics or items that should not be spun, such as wool or silk.
2. Extra Rinse: This setting provides an additional rinse cycle before the spinning starts. It is useful for heavily soiled garments or those with sensitive skin that require extra rinsing.
3. Rinse Hold: This setting prevents the spin cycle from starting after rinsing. It keeps the laundry soaking in water until you manually initiate the spin cycle or unlock the machine. It can be helpful if you are unable to unload the machine immediately after the cycle ends.
4. Spin Only: This setting allows you to spin a load of laundry without running a complete wash cycle. It can be used for clothes that have been hand-washed but require spinning to remove excess water.
5. Quick Spin: This setting is used for a short spin cycle, which typically lasts a few minutes. It is handy when you need to remove excess water from lightly soiled clothes or when you want to reduce drying time when using a clothes dryer.
6. Mixed Load: This automatic setting adjusts the spin speed based on the weight and type of the laundry. It is suitable for a mixed load of different fabrics and soil levels.
7. Cottons: This setting is ideal for everyday cotton items, such as t-shirts, towels, and bed linens. The spin speed can usually be adjusted within this setting to match the load's requirements.
8. Synthetics: This setting is designed for synthetic fabrics, such as polyester or nylon. It has a lower spin speed compared to the cotton setting to prevent garment damage.
9. Delicates/Silk: This setting is specifically designed for delicate fabrics like silk, lace, or lingerie. It uses a minimal spin speed to protect the sensitive fabrics from damage.
10. Wool: This setting is meant for woolen garments. It involves a delicate spin speed to prevent stretching or ruining the fibers.
These are the common spin settings found on the Beko WMB-71643-PTS washing machine. However, the exact spin options may vary depending on the model and version of the machine.