Beko WM-74135-W user manual

There could be several reasons why your Beko machine is not working. Some common issues and solutions include:
1. Power supply: Ensure that the machine is properly plugged in and that there is power supply to the outlet. Check the circuit breaker or fuse box to make sure there are no issues with the electrical system.
2. Machine not turned on: Make sure the machine is in the "on" position and that any buttons or switches are properly engaged.
3. Door not closed properly: Many Beko machines have safety mechanisms that prevent operation if the door is not securely closed. Ensure that the door is closed and latched properly.
4. Water supply issues: Check that the water supply is turned on and that the machine is properly connected to the water source. Also, make sure the water pressure is sufficient for the machine to function.
5. Drainage problems: Check if the drainage system is clogged or blocked. Clean the filter or check for any kinks or blockages in the drain hose.
6. Error codes: Beko machines often display error codes when there is a malfunction. Consult the user manual or the manufacturer's website for a list of error codes and their corresponding solutions.
If none of these solutions resolve the issue, it is recommended to contact Beko's customer support or a professional technician for further assistance. They will be able to diagnose and fix any internal or technical problems with the machine.

Specific instructions can vary depending on the exact model of your Beko washing machine.
In general, this is how you could try to reset the device:
1. Turn off the washing machine and unplug it from the outlet.
. Wait for around 30 minutes.
3. Plug the washing machine back in.
4. Press and hold the Start/Pause button for around 5 seconds.
5. Choose your washing settings and start a cycle as per usual.
If your washing machine is displaying an error code, consider looking it up in the machine's manual or on the Beko website to diagnose the problem. If the issue persists, it may be necessary to contact Beko customer service or a professional repair person.
Note that these instructions might not work perfectly for every Beko model. Refer to your user booklet for model specific instructions.

To program your Beko washing machine, follow these steps:
1. Turn on the washing machine by pressing the power button.
. Check if the water supply is connected and turned on.
3. Sort your laundry according to fabric type, color, and care instructions.
4. Open the washing machine door and load the laundry evenly in the drum. Avoid overloading the machine.
5. Close the door properly to ensure it is locked.
6. Turn the program dial to select the desired wash program. The available programs will vary depending on your model, but common options include cotton, synthetics, delicates, wool, quick wash, etc.
7. If needed, adjust the temperature and spin speed using the respective buttons or dials. The appropriate settings depend on your laundry's fabric and care requirements.
8. Optionally, you can add detergent, fabric softener, or any other laundry additives to the dispenser drawers. Follow the recommended dosage for your load size and water hardness.
9. Press the start/pause button to commence the wash cycle. You may also need to press the start button twice, or a similar combination to begin the program, depending on your model.
10. The machine will fill with water and initiate the wash cycle. You can monitor the remaining time on the digital display or progress indicators if available.
11. If necessary, you can pause or cancel the program during the wash cycle by pressing the appropriate button. Follow the manufacturer's instructions for your specific model.
12. After completing the wash and rinse cycles, the machine will automatically go into the spinning phase to remove excess water. The spin speed may depend on the program selected or can be manually adjusted.
13. Once the washing and spinning phases are complete, the machine will display "End" or another indication that the cycle is finished.
14. Open the door and remove your laundry.
15. Clean the filter and drum of the washing machine regularly to maintain its performance and prolong its lifespan.
Remember to refer to your Beko washing machine's user manual for specific instructions and details tailored to your appliance model.

There could be several reasons why your Beko washing machine is not draining and spinning:
1. Clogged drain hose or filter: Check the drain hose and filter for any blockages. Detach the hose from the back of the machine and check for any foreign objects or debris clogging it. Additionally, remove and clean the filter located at the bottom of the machine.
2. Pump issues: The drain pump may be malfunctioning or blocked. Listen for any unusual noises when the machine is attempting to drain. If you suspect a problem with the pump, it may need to be repaired or replaced.
3. Faulty lid or door switch: If the lid or door switch is not functioning properly, the machine may not enter the spin cycle. Check if the switch is broken or misaligned, and have it repaired if needed.
4. Overloaded machine: If the machine is overloaded with too many clothes, it may not be able to drain and spin properly. Try reducing the load size and see if that resolves the issue.
5. Electronic or motor issues: There may be a problem with the machine's electronic controls or motor. It is recommended to contact a professional technician to diagnose and repair any electrical or motor issues.
If these troubleshooting steps do not resolve the problem, it is advisable to contact Beko customer service or a trained technician for further assistance.