Beko ECO-WMB-81445-LW user manual

To program your Beko washing machine, follow these steps:
1. Turn on the washing machine by pressing the power button.
. Check if the water supply is connected and turned on.
3. Sort your laundry according to fabric type, color, and care instructions.
4. Open the washing machine door and load the laundry evenly in the drum. Avoid overloading the machine.
5. Close the door properly to ensure it is locked.
6. Turn the program dial to select the desired wash program. The available programs will vary depending on your model, but common options include cotton, synthetics, delicates, wool, quick wash, etc.
7. If needed, adjust the temperature and spin speed using the respective buttons or dials. The appropriate settings depend on your laundry's fabric and care requirements.
8. Optionally, you can add detergent, fabric softener, or any other laundry additives to the dispenser drawers. Follow the recommended dosage for your load size and water hardness.
9. Press the start/pause button to commence the wash cycle. You may also need to press the start button twice, or a similar combination to begin the program, depending on your model.
10. The machine will fill with water and initiate the wash cycle. You can monitor the remaining time on the digital display or progress indicators if available.
11. If necessary, you can pause or cancel the program during the wash cycle by pressing the appropriate button. Follow the manufacturer's instructions for your specific model.
12. After completing the wash and rinse cycles, the machine will automatically go into the spinning phase to remove excess water. The spin speed may depend on the program selected or can be manually adjusted.
13. Once the washing and spinning phases are complete, the machine will display "End" or another indication that the cycle is finished.
14. Open the door and remove your laundry.
15. Clean the filter and drum of the washing machine regularly to maintain its performance and prolong its lifespan.
Remember to refer to your Beko washing machine's user manual for specific instructions and details tailored to your appliance model.

To reset your Beko washing machine, you can try the following steps:
1. Unplug your washing machine from the power outlet.
. Wait for approximately 1 minute to ensure that all power is completely drained from the machine.
3. Plug the washing machine back into the power outlet.
4. Turn the machine on by pressing the power button (usually located on the control panel).
5. Press and hold the Start/Reset button for about 5 seconds until the machine beeps or the display shows signs of reset (such as all the lights flashing).
6. Release the Start/Reset button.
7. Wait for a few seconds for the reset process to complete.
8. Your Beko washing machine should now be reset and ready for use.
If the above steps do not work, it is recommended to consult the user manual for your specific Beko washing machine model. The manual may have specific instructions on how to reset your machine or troubleshooting tips for your specific issue.

The eco wash cycle on the Beko WMB-81445-LW washing machine typically takes about 3 hours to complete. However, the exact duration may vary depending on the specific settings and load size.

There could be several reasons why your Beko washing machine is not draining and spinning:
1. Clogged drain hose or filter: Check the drain hose and filter for any blockages. Detach the hose from the back of the machine and check for any foreign objects or debris clogging it. Additionally, remove and clean the filter located at the bottom of the machine.
2. Pump issues: The drain pump may be malfunctioning or blocked. Listen for any unusual noises when the machine is attempting to drain. If you suspect a problem with the pump, it may need to be repaired or replaced.
3. Faulty lid or door switch: If the lid or door switch is not functioning properly, the machine may not enter the spin cycle. Check if the switch is broken or misaligned, and have it repaired if needed.
4. Overloaded machine: If the machine is overloaded with too many clothes, it may not be able to drain and spin properly. Try reducing the load size and see if that resolves the issue.
5. Electronic or motor issues: There may be a problem with the machine's electronic controls or motor. It is recommended to contact a professional technician to diagnose and repair any electrical or motor issues.
If these troubleshooting steps do not resolve the problem, it is advisable to contact Beko customer service or a trained technician for further assistance.