Beko DIN15322 user manual

Here are the general steps for using your Beko dishwasher for the first time:
1. Installation: Ensure your dishwasher is properly installed. This should be done by a professional to guarantee all water connections, electrical connections and placements are correct.
2. Power On: Connect your dishwasher to a power source and turn it on.
3. Detergent Dispenser: Fill the detergent dispenser with the appropriate amount of dishwasher detergent. If your Beko machine has an additional compartment for rinse aid, fill it as well.
4. Load Dishes: Load your dishes into the dishwasher, making sure they’re properly placed and not blocking the spray arms. Load heavily soiled items in the lower basket and more delicate items in the upper basket.
5. Select a Program: Your Beko dishwasher will have a number of programs to choose from. These might range from "Eco" for energy saving, "Intensive" for heavily soiled dishes, to "Quick & Shine" for a faster wash. Consult your user manual for more information about the programs your specific model offers.
6. Start the Dishwasher: Close the dishwasher door and press the start button. The machine will begin working. The remaining time might be shown on a display.
7. Unloading: When the cycle is finished, wait a few minutes before opening the door to allow steam to dissipate. Unload the lower basket first to prevent water from upper basket falling onto the dishes below.
8. Safety Measures: Keep children away from detergent and the dishwasher when it's running, as the door can become hot.
Remember, always consult your user's manual for specific instructions related to your specific model of Beko dishwasher before using it for the first time.

There could be several reasons why your Beko dishwasher is not starting:
1. Power Issue: First, check to see if the dishwasher is plugged in and receiving power. If the outlet is working, check for a tripped breaker or blown fuse in your home's electrical panel.
2. Door Latch: The dishwasher will not start if the door is not properly latched. Check the latch for any obstructions or damage.
3. Control Panel: If the control panel is not responding, it may be faulty or have a loose connection.
4. Start Relay: The start relay is a device that powers the dishwasher motor. If this part is defective, the dishwasher will not start.
5. Timer: If the timer is not advancing or is defective, this could prevent the dishwasher from starting.
6. Thermal Fuse: The thermal fuse shuts off power to the dishwasher if it overheats. If the thermal fuse has blown, the dishwasher will not start.
Consider contacting a professional if you can't diagnose or fix the problem yourself.

To reset your Beko dishwasher, you can follow these steps:
1. Turn off the dishwasher by pressing the power button or by unplugging it from the power source.
. Wait for 1-2 minutes and then turn it back on.
3. Open the dishwasher door and locate the control panel.
4. Press and hold the "Start" or "Cancel" button for about 5 seconds.
5. Release the button once the lights on the control panel start flashing or the display shows an error message.
6. Wait for a few seconds until the lights stop flashing.
7. Close the dishwasher door and the reset process should be complete.
Note: If the above steps do not work, you can refer to the user manual of your specific Beko dishwasher model for resetting instructions, as they may vary slightly depending on the model.

On average, a Beko dishwasher is designed to last between 10-15 years with regular use and proper maintenance. However, the lifespan of a dishwasher can vary depending on factors such as usage patterns, water quality, and maintenance.