Beko CFG3582W user manual

The ideal setting for your Beko CFG3582W refrigerator depends on several factors, such as the ambient temperature, the amount of food stored, and personal preference. However, as a general guideline, it is recommended to set the fridge temperature between 36-40°F (2-4°C) to ensure that food is kept at a safe temperature for consumption.

In the Beko CFG3582W refrigerator, the temperature settings typically range from 1 to 5, with 1 being the warmest and 5 being the coldest setting. Therefore, if you want a colder temperature, you should set it to 5.

There could be several reasons why your Beko fridge freezer is not getting cold. Here are a few possible causes:
1. Power issue: Check if the fridge freezer is properly plugged into an electrical outlet and that the outlet is working. Make sure the power cord is not damaged.
2. Temperature settings: Ensure that the temperature settings on the fridge and freezer compartments are set correctly. The settings might have been accidentally changed, causing the appliance not to cool properly.
3. Door seal: Check if the door seal is sealing properly. A loose or damaged seal can result in warm air entering the fridge freezer, preventing it from cooling effectively.
4. Blocked air vents: Inspect the air vents in both the fridge and freezer compartments to see if they are blocked by items placed too close to the vents. Blocked air vents restrict the airflow, hampering the cooling process.
5. Condenser coils: The condenser coils at the back of the fridge freezer may be dirty or clogged with dust and debris. Clean the coils and ensure there is enough space around them for proper airflow.
6. Faulty thermostat: The thermostat controls the temperature inside the fridge freezer. If it is faulty, it may not be reading the temperature correctly or not functioning at all. In this case, you may need to replace the thermostat.
7. Faulty compressor: The compressor is responsible for the cooling process. If it is not working properly, it will not be able to cool the fridge freezer. A professional technician may be required to diagnose and replace a faulty compressor.
If none of these potential solutions resolve the issue, it is recommended to contact a Beko authorized service center or a qualified appliance repair technician to further diagnose and fix the problem.

On average, it takes a Beko fridge freezer about 4-6 hours to reach the desired cooling temperature. However, this can vary based on factors such as the starting temperature of the food and drinks stored inside, the ambient temperature of the room, and the specific model and settings of the fridge freezer.