Beko CEP5152B user manual

It is recommended to clean your Breville espresso machine after every use. This ensures that any coffee residue or oils are removed, preventing them from building up and affecting the flavor of your future drinks. Regular cleaning also helps to prolong the lifespan of your machine and maintain its optimal performance.

There can be multiple reasons why your Beko CEP5152B espresso machine is not working. Here are a few possibilities:
1. Power supply: Ensure that the machine is properly plugged in and receiving power. Check if the power switch is ON and if the power cord is not damaged.
2. Water supply: Make sure there is sufficient water in the water tank of the machine. Some machines have sensors that won't allow any operation if the water level is too low.
3. Clogged water system: Over time, mineral deposits or coffee residues can build up in the machine's water system, clogging it and preventing proper water flow. Try descaling the machine following the manufacturer's instructions.
4. Grinder issues: If your machine has a built-in grinder, check if it is working properly. Clean or disassemble the grinder if necessary, as it may be blocked by coffee residues or other debris.
5. Incorrect settings: Review the settings on your espresso machine, such as water temperature, grind size, and extraction time. Ensure they are properly adjusted for your desired coffee strength and taste.
6. Maintenance required: Regular cleaning and maintenance are crucial for espresso machines. Refer to the user manual for specific cleaning instructions. Neglecting proper maintenance can lead to decreased performance or malfunctioning.
If you have tried these steps and your machine still doesn't work, it might be a good idea to contact Beko customer support or visit a service center for further assistance.

To reset a Beko CEP5152B coffee maker, you can follow the steps below:
1. Unplug the coffee maker from the power outlet.
. Remove the water reservoir and empty it.
3. Open the coffee maker's lid and remove the coffee filter and any leftover grounds.
4. Close the coffee maker's lid.
5. Plug the coffee maker back into the power outlet.
6. Press and hold the "On/Off" button for approximately 10 seconds until you hear a beep or see the display turn off and on.
7. Release the "On/Off" button.
This should reset the coffee maker to its factory settings. Remember to refill the water reservoir and insert a new coffee filter before brewing your next batch of coffee.