Beats POWERBEATS-PRO user manual

To check the power level of your Powerbeats Pro, follow these steps:
1. Make sure your Powerbeats Pro earphones are connected to your device (phone, tablet, etc.).
2. On your connected device, open the Control Center (on iOS devices, swipe down from the top right corner; on Android devices, swipe down from the top of the screen).
3. Look for the battery widget or icon, which typically shows the battery levels of your connected devices.
4. Within the battery widget or icon, you should see the battery status of your Powerbeats Pro earphones, indicating how much power they have remaining.
Additionally, you can also check the power level through the Beats app. If you have the Beats app installed on your device, open it and navigate to the Powerbeats Pro section. The app should display the current battery level of the earphones.
Keep in mind that the exact method may vary slightly depending on your operating system and device.

Powerbeats Pro have several buttons to control different functions. Here's what each button does:
1. Volume Adjustment buttons: There are two buttons (+ and -) located on the top of earbuds. Press + to audio volume up and - to audio volume down.
2. Multi-function "b" button: The Beats "b" logo on both earbuds functions as a multi-use button. It can be used to control tracks and calls.
- Single press: Play/Pause music, Answer/End a call
- Double press: Skip to the next track
- Triple press: Skip back or replay a track
- Long press: Deny an incoming call
3. Sensor: This isn't a button but it's worth mentioning that Powerbeats Pro have a sensor that notice when you take out an earbud, and it pauses playback.
4. Charging Port: Not a button, but the charging port is found inside the carrying case, next to where you slot the earbuds.
Remember that most functions can also be controlled directly from your connected device.