AVM FRITZ-WLAN-REPEATER-310 user manual

To set up your Fritz WLAN repeater 310, please follow these steps:
1. Connect the repeater to a power source and wait until the power LED is solid green.
. On your computer or mobile device, go to the Wi-Fi settings and connect to the repeater's Wi-Fi network, which should be named "FRITZ!WLAN Repeater XXXX" (with XXXX being the last four digits of the repeater's serial number).
3. Open a web browser and enter "http://fritz.repeater" in the address bar. If this doesn't work, try entering "http://192.168.178.2" instead.
4. You will be directed to the Fritz WLAN Repeater setup wizard. Follow the on-screen instructions to set up the repeater.
5. During the setup process, you will be prompted to select your existing Wi-Fi network. Choose the network you want to extend and enter its password when prompted.
6. After completing the setup, the repeater will restart automatically, and you will be disconnected from its Wi-Fi network. You can now connect your devices to the newly extended Wi-Fi network using the same network name and password as your existing network.
Note: If the repeater can't find your existing Wi-Fi network during the setup, make sure that it is close enough to receive a strong signal from the main router. You may need to reposition the repeater or the router to improve the connection.
If you encounter any issues or need more detailed instructions, referring to the user manual or contacting AVM support might be helpful.

To determine if your Fritz WLAN Repeater 310 is working, follow these steps:
1. Check the power LED: When the repeater is powered on, the power LED should be illuminated. If it is not lit, ensure that the repeater is properly plugged into a power outlet.
2. Verify the WLAN LED: The WLAN LED on the device should indicate the wireless network status. If the LED is off, press the WLAN button on the repeater to enable the wireless network.
3. Test the wireless connectivity: Connect a device (e.g., smartphone, laptop) to the wireless network of the repeater. Ensure that the device is within range of the repeater's signal. If you can successfully connect to the network and access the internet, the repeater is working.
4. Use the Fritzbox user interface: Access the user interface of your Fritzbox router to review the status of the repeater. Open a web browser on a device connected to your Fritzbox network and enter the IP address of your Fritzbox router (e.g., 192.168.178.1). Navigate to the wireless settings section and check if the repeater is listed as connected.
5. Check the signal strength: Use your device's wireless signal strength indicator to see if the repeater is providing a stronger signal compared to your original router. Move your device further away from the router to determine if the repeater signal remains strong.
By following these steps, you can determine if your Fritz WLAN Repeater 310 is functioning properly and extending your wireless network as intended.

To connect your Fritz repeater to your router, follow these steps:
1. Find a suitable location for your Fritz repeater. It should be placed in an area where it receives a strong wireless signal from your router.
. Plug the Fritz repeater into a power outlet and turn it on.
3. On your computer or mobile device, open the wireless settings and search for available networks.
4. Look for a network named "FRITZ!WLAN Repeater (xxxx)" in the list of available networks, where "xxxx" represents the last four digits of the repeater's MAC address.
5. Connect to the FRITZ!WLAN Repeater network by clicking on it and entering the network password if prompted.
6. Once connected, open a web browser and enter "http://fritz.repeater" or "http://192.168.178.2" in the address bar.
7. The web interface of the Fritz repeater will open. Follow the on-screen instructions to complete the initial configuration.
8. During the configuration process, you will be prompted to select your main router's network (SSID) and enter the password. Select your router's network and enter the password correctly.
9. After entering the router's network information, the Fritz repeater will establish a connection to your router.
10. Once the connection is established, you can relocate the Fritz repeater to a place where it provides optimal coverage.
Note: The exact steps may vary slightly depending on the version of the Fritz repeater you have. Refer to the user manual or documentation provided by AVM for detailed instructions.