Audio-Technica ATH-SR50BT user manual

To reset your Audio-Technica ATH-SR50BT headphones, you can follow these steps:
1. Turn off the headphones.
. Press and hold the power button and volume up button simultaneously for about 8 seconds until the indicator light starts flashing blue rapidly.
3. Release the buttons and wait for the headphones to reset. The status indicator light will turn off briefly and then start flashing blue and red alternately, indicating that the reset process is complete.
Once the reset is complete, you can try connecting your headphones to your desired device again.

There could be several reasons why your Audio-Technica ATH-SR50BT headphones won't connect. Here are a few troubleshooting steps you can try:
1. Make sure your headphones are in pairing mode: To enable pairing mode, turn off your headphones, then press and hold the power button until the LED indicator flashes rapidly in blue and red.
2. Check if your headphones are already connected to another device: Disconnect your headphones from any previously paired devices. If they are connected to another device, go to that device's Bluetooth settings and disconnect or forget the headphones.
3. Ensure that the headphones are within range: Bluetooth has a limited range, usually around 30 feet. Make sure your headphones and the device you want to connect them to are within this range.
4. Turn off and on the Bluetooth on your device: Sometimes, restarting the Bluetooth connection can help establish a successful connection. Disable Bluetooth on your device, then turn it back on after a few seconds.
5. Restart both your headphones and the device you want to connect them to: Turn off your headphones and the device's Bluetooth, then power them on again and try reconnecting.
6. Clear your headphone's pairing memory: If none of the above steps work, you can try clearing the existing pairing on your headphones. Press and hold the power button and volume up button simultaneously until the LED indicator flashes quickly in blue and red. This will clear the pairing memory, and you can try pairing again.
7. Verify if your device is compatible: Ensure that the device you are trying to connect your headphones to is compatible with Bluetooth devices and supports the required Bluetooth profile for your headphones.
If you have followed all these troubleshooting steps and still cannot connect your Audio-Technica ATH-SR50BT headphones, it may be best to contact Audio-Technica's customer support for further assistance.