Asus VG279Q user manual

The 5-way button or joystick on an ASUS monitor like VG279Q is an OSD (On-Screen Display) control tool. It allows you to easily navigate and make changes in the monitor's settings menu by moving it up, down, left, right, or pressing it down to select options. This includes adjustments to elements like brightness, contrast, refresh rate, monitor modes, and more. It is typically found on the back of the monitor.

Yes, the ASUS VG279Q is a good monitor for gaming. It has a 27-inch Full HD display with a 144Hz refresh rate and a 1ms response time, which allows for smooth and responsive gameplay. It also supports Adaptive Sync technology (compatible with both AMD FreeSync and NVIDIA G-SYNC), which helps eliminate screen tearing and stuttering during gaming. Additionally, it has a wide color gamut and good color accuracy for an immersive gaming experience. Overall, it is a well-regarded monitor for gaming purposes.

The input select button on an Asus monitor is a button typically found on the front panel or bottom edge of the monitor. It is used to toggle between different input sources, such as HDMI, DisplayPort, VGA, DVI, etc. By pressing the input select button, you can cycle through the available input options to choose the desired input source for displaying content on the monitor.

To change the settings on your Asus VG279Q monitor, you can follow these steps:
1. Press the physical buttons located at the back or bottom-right side of the monitor to access the on-screen display (OSD) menu.
2. Use the navigation buttons (usually directional buttons) to navigate through the OSD menu. The buttons typically correspond to specific functions, such as up, down, left, right, and confirm/enter.
3. Look for the settings you want to adjust, such as brightness, contrast, color temperature, and sharpness. The exact menu options may vary depending on your specific model of Asus monitor.
4. Once you find the setting you wish to change, use the navigation buttons to highlight it. Then, select the setting by pressing the confirm/enter button.
5. Adjust the value of the selected setting using the navigation buttons. For instance, you can increase or decrease brightness by pressing the up or down button respectively.
6. After making any desired changes, navigate to the "Exit" or "Apply" option in the OSD menu and select it to save and exit the settings.
Note: Some Asus monitors also offer software control options, allowing you to adjust settings through your computer. Ensure you have installed any necessary drivers or control software for your monitor and follow the software instructions accordingly, if applicable.