Asus VE248H user manual

To remove the stand on the Asus VE248H monitor, you can follow these steps:
1. Lay a soft, clean cloth or towel on a flat surface to prevent any scratches on the monitor.
. Carefully lay the monitor face-down on the cloth.
3. Locate the screw or release button that secures the stand to the back of the monitor.
4. If there is a screw, use a screwdriver to loosen and remove it. If there is a release button, press and hold it.
5. While the screw is loose or the release button is held, firmly grip the stand and pull it away from the back of the monitor.
6. Gently lift the monitor and separate it from the stand.
It's essential to be cautious while removing the stand to avoid any damage to the monitor.

The input select button on an Asus monitor is a button typically found on the front panel or bottom edge of the monitor. It is used to toggle between different input sources, such as HDMI, DisplayPort, VGA, DVI, etc. By pressing the input select button, you can cycle through the available input options to choose the desired input source for displaying content on the monitor.

To connect your Asus VE248H monitor to HDMI, follow these steps:
1. Identify the HDMI port on your monitor. It should be labeled as HDMI.
2. Locate an available HDMI port on your computer or device. Most modern computers and laptops have HDMI ports built-in.
3. Take one end of the HDMI cable and plug it into the HDMI port on the Asus VE248H monitor.
4. Take the other end of the HDMI cable and plug it into the HDMI port on your computer or device.
5. Once plugged in, turn on your Asus monitor and your computer.
6. Use the monitor's input selection button/menu to choose the HDMI input. This may require pressing a button on the front or side of the monitor, or accessing the menu through the monitor's settings.
7. The Asus monitor should now be connected to HDMI, and you should see the display from your computer on the monitor.
If you encounter any issues or the monitor does not display anything after connecting, ensure that the HDMI cable is securely plugged in on both ends and try selecting the HDMI input again using the monitor's input selection.

To remove the stand from the Asus VN248H monitor, you can follow these steps:
1. Lay the monitor face down on a soft and flat surface to prevent any damage to the screen.
. Locate and unscrew the four screws connecting the stand to the monitor. These screws are typically located at the back near the bottom edge of the monitor.
3. Once the screws are removed, you can slide the stand out of the monitor by gently pulling it towards you.
4. The stand should easily come off, and you can now place the monitor in a different position, mount it on a wall, or attach it to a different stand if desired.
Note: Be sure to exercise caution while handling the monitor and stand to avoid any accidents or damage.