Asus RT-N12 user manual

To access your Asus RT-N12 router, you can follow the steps below:
1. Connect your computer to the router using an Ethernet cable or connect to its wireless network.
2. Open a web browser (such as Chrome, Firefox, or Internet Explorer).
3. In the address bar of the web browser, type in the default IP address for the Asus RT-N12 router: 192.168.1.1
4. Press Enter to load the router's login page.
5. If prompted, enter the default username and password. The default login credentials for the Asus RT-N12 router are usually as follows:
- Username: admin
- Password: admin or leave it blank
6. After entering the correct login credentials, click on the "Login" or "OK" button to access the router's configuration interface.
Once logged in, you will be able to modify various settings and configure your Asus RT-N12 router to meet your specific needs.

To set up your Asus RT-N12 wireless router, you can follow these steps:
1. Connect your router: Connect your router to the modem using an Ethernet cable. Plug one end of the cable into the modem's LAN port and the other end into the router's WAN port.
2. Power on: Connect the router to a power source and turn it on using the power button.
3. Access the router's interface: Open a web browser on your computer and enter "http://192.168.1.1" or "http://router.asus.com" in the address bar. Press Enter.
4. Login: Enter the default username and password. The default values are usually "admin" for both the username and password. If you have changed them previously, use your updated login credentials.
5. Configure basic settings: Once logged in, you will be directed to the router's settings page. You can choose to run the setup wizard or manually configure the settings. The setup wizard will guide you through the process of configuring your Internet connection, wireless network name (SSID), and security settings.
6. Customize advanced settings (optional): If needed, you can tweak advanced settings like port forwarding, firewall settings, guest network setup, QoS, etc., to optimize your router's performance. However, these settings are optional and can be customized as per your requirements.
7. Apply changes: After making any changes, ensure to click on the "Apply" or "Save" button to save the settings.
8. Connect wireless devices: Locate the newly created wireless network and connect your devices using the provided network password.
By following these steps, you should be able to successfully set up your Asus RT-N12 wireless router.

To reset the password on your Asus RT-N12 router, you can follow these steps:
1. Locate the reset button on the back of the router. It is usually a small hole beside the power input.
. Using a pin or paperclip, press and hold the reset button for about 10 seconds until the power LED starts to blink.
3. Release the reset button and wait for the router to reboot.
After the reset, the router's settings will be restored to their default values, including the administrator password. You can then access the router's configuration page using the default username and password:
Username: admin
Password: admin (or leave it blank)
Once logged in, you can change the password to a new one of your choice.

To access your ASUS router wirelessly, follow these steps:
1. Ensure that your computer or device is connected to the Wi-Fi network of your ASUS router.
2. Open a web browser on your connected device, such as Chrome, Firefox, or Safari.
3. In the address bar of the web browser, type in the default IP address of your ASUS router. The default IP address is usually "192.168.1.1" or "192.168.0.1", but it may vary depending on your specific router model. Press Enter.
4. A login page will appear, prompting you for a username and password. Enter the login credentials for your ASUS router. If you haven't changed them, the default username and password are usually "admin" for both.
5. After entering the correct login details, you will be directed to the router's web-based administration interface. From here, you can access and configure various settings of your router wirelessly, such as Wi-Fi settings, network settings, security settings, etc.
Note: If you have previously changed the username and password for your ASUS router and can't remember them, you may need to perform a factory reset to restore the default credentials. However, keep in mind that a factory reset will erase any customized settings and configurations you have made on your router.