Asus RT-AX58U user manual

Setting up your ASUS router may vary depending on your specific model and your personal needs/preferences. For the ASUS RT-AX58U, the following key settings are recommended for optimum performance:
1. Router Placement: For the best range and signal strength, your router should be placed centrally in your home or office, away from thick walls and electronic devices known to cause interference.
2. Wireless Settings:
- Network Name (SSID): Choose a name that is easy to remember.
- Authentication Method: Use WPA2-Personal or WPA3-Personal for the best security.
- Password: Set a strong, unique password to keep your network secure.
3. QoS (Quality of Service) Settings: For better experience on online gaming or streaming, enable the QoS and prioritize these services.
4. Firmware: Ensure your router's firmware is updated. This can usually be done from the administration interface of the router or from ASUS official website.
5. Enable the AiProtection: This On-board security feature offers you added peace-of-mind by blocking malicious addresses and preventing intrusions.
6. Enable the Adaptive QoS: Adaptive Quality of Service (QoS) optimizes your network's bandwidth, ensuring the best balance of speed and stability.
7. Enable Dual Band: If your devices support it, make sure to enable and use both the 2.4GHz and 5GHz bands. The 5GHz band can provide faster speeds, while the 2.4GHz band offers better range.
Remember, while these general settings aid performance and security, it's important to adjust settings based on your individual needs and situations. Always review and understand settings before modifying them.

Here's a step-by-step instruction on how to set up your ASUS RT-AX58U router:
1. First, connect your modem to the WAN port of the router using an Ethernet cable.
2. Then, connect your computer to the routers LAN port number 1 with another Ethernet cable.
3. Now, take the power cable and plug one end into the power supply and the other end into the power port on the back of the router. Switch on the router and wait until the LEDs light up.
4. Open a web browser and type "http://router.asus.com" into the address bar, then press the Enter key to access the routers' web interface.
5. If you cannot connect using the above URL, use '192.168.1.1' as the address to connect. The initial setup page should appear.
6. Choose your preferred language and click on the 'Go' button.
7. The ASUS setup wizard will now start to guide you through the configuration process.
8. You will have to create a username and password for your router. Make sure to note these down for future reference and click next.
9. The router will prompt you to set your time zone and current time.
10. The next step is to set up the wireless connection. Enter a network name (SSID) and password for both 2.4 GHz and 5 GHz frequency bands.
11. To apply all the settings, click on the 'Apply' button. The router will now show you all the settings that you applied.
12. Wait for the router to finish rebooting and test your Internet connection. You should be able to connect to the new wireless network using the SSID and password you've just set.
Remember to update your router with the latest firmware. For this, head to the official ASUS website, look for your model, and download the new software. This often fixes bugs and frequently can improve your network's speed and stability.

No, the Asus RT-AX58U is a Wi-Fi router, not a modem. It does not have a built-in modem, so you would need to connect it to a separate modem or modem-router combo device to establish an internet connection.

To access your ASUS router wirelessly, follow these steps:
1. Ensure that your computer or device is connected to the Wi-Fi network of your ASUS router.
2. Open a web browser on your connected device, such as Chrome, Firefox, or Safari.
3. In the address bar of the web browser, type in the default IP address of your ASUS router. The default IP address is usually "192.168.1.1" or "192.168.0.1", but it may vary depending on your specific router model. Press Enter.
4. A login page will appear, prompting you for a username and password. Enter the login credentials for your ASUS router. If you haven't changed them, the default username and password are usually "admin" for both.
5. After entering the correct login details, you will be directed to the router's web-based administration interface. From here, you can access and configure various settings of your router wirelessly, such as Wi-Fi settings, network settings, security settings, etc.
Note: If you have previously changed the username and password for your ASUS router and can't remember them, you may need to perform a factory reset to restore the default credentials. However, keep in mind that a factory reset will erase any customized settings and configurations you have made on your router.