ARC SONOS user manual

To connect your Sonos Arc to your TV, follow these steps:
1. Ensure that your TV is turned off and your Sonos Arc is plugged into a power source.
. On your TV, identify the HDMI ARC (Audio Return Channel) port. It is usually labeled as ARC or has a specific HDMI port number assigned to it.
3. Connect one end of the HDMI cable to the ARC HDMI port on your TV and the other end to the HDMI eARC port on the Sonos Arc. Make sure it is firmly connected.
4. Turn on your TV and navigate to the settings menu.
5. Locate the audio settings in the TV settings menu. Look for options related to audio output or sound settings.
6. In the audio settings, select the output option that corresponds to the HDMI ARC port. This might be labeled as "HDMI ARC," "eARC," or similar.
7. Once you have selected the HDMI ARC as the audio output, your TV should automatically recognize and connect to the Sonos Arc.
8. Follow any additional prompts or instructions on your TV screen or Sonos app to complete the setup process.
After the initial setup, you can control the Sonos Arc's volume and other audio settings directly from your TV remote or through the Sonos app on your smartphone or tablet.

To get the best sound on your Sonos Arc, follow these steps:
1. Proper Placement: Position the Sonos Arc correctly by placing it directly in front of your TV at ear level. Ideally, the Arc should be mounted on a wall or placed on a TV stand. Ensure there are no obstructions that may block or muffle the sound.
2. Room Calibration: Use the Trueplay feature in the Sonos app to optimize the sound based on the layout of your room. This feature uses your smartphone's microphone to analyze the acoustics and adjust the audio accordingly. Follow the on-screen instructions in the Sonos app to perform the Trueplay calibration. This will enhance the sound quality specifically for your room.
3. Adjust EQ Settings: Customize the sound according to your preferences by adjusting the equalizer (EQ) settings in the Sonos app. In the Sonos app, go to Room Settings, select the Sonos Arc, and then choose EQ. From there, you can adjust bass, treble, and loudness to suit your taste. Experiment with the settings until you achieve the desired sound output.
4. Ensure High-quality Content: To experience the best sound, make sure you're streaming or playing high-quality audio content. Some streaming services offer higher quality options, such as Tidal HiFi or Deezer HiFi, which provide lossless audio. Consider using these services for the best audio experience.
5. Use Surround Speakers/Subwoofer: If you have additional Sonos speakers, such as Sonos One or Sonos One SL, you can pair them with the Sonos Arc for a surround sound setup. Additionally, integrating a Sonos Sub for added bass can further enhance the overall sound quality.
6. Update Firmware: Regularly check for firmware updates for your Sonos Arc. These updates often include improvements and bug fixes that might enhance the sound performance. Open the Sonos app, go to Settings, select System Updates, and follow the instructions to update your Arc's firmware when available.
By following these steps, you can optimize the sound quality of your Sonos Arc and enjoy an immersive audio experience.

The Sonos Arc soundbar has touch controls in the form of capacitive buttons on the top of the device. These touch controls include:
1. Play/Pause: Tap the touch area once to play or pause the audio playback.
. Volume: Swipe your finger along the touch area to increase or decrease the volume.
3. Previous/Next Track: Swipe left or right on the touch area to go to the previous or next track, respectively.
4. Mute: Tap and hold the touch area for 2 seconds to mute or unmute the sound.
5. Microphone On/Off: Tap the microphone symbol on the touch area to enable or disable the built-in microphones for voice control.
6. Status Light: A white LED light illuminates momentarily when any touch control is used to indicate that the command has been registered.
It's worth noting that these touch controls are optional, and you can also control the Sonos Arc using the Sonos app, voice commands with a compatible voice assistant like Amazon Alexa or Google Assistant, or a compatible TV remote.

To change your Sonos Arc settings, follow these steps:
1. Open the Sonos app on your mobile device or computer.
. Tap on the "Browse" tab at the bottom-right corner of the screen.
3. Scroll down and select "Room Settings."
4. Choose the room where your Sonos Arc is located.
5. In the "Room Settings" page, you will find various options to customize your Sonos Arc:
- Under "Audio," you can adjust the volume and enable features like "Night Sound" and "Speech Enhancement."
- In "Equalization," you can modify the bass and treble settings.
- "TV Autoplay" allows the Arc to turn on automatically when it detects a signal from your TV.
- In "TV Dialog Level," you can set the dialog level to increase the volume of voices in movies and shows.
- "Line-In" settings are available if you have connected an external device to the Arc.
- You can also configure "Home Theater Setup" to optimize the audio based on your room acoustics.
6. Adjust the desired settings according to your preferences.
7. Once you've made the changes, tap on the back arrow in the top-left corner to return to the previous menu.
8. Repeat the steps for any other settings you wish to modify.
9. Close the Sonos app, and your Sonos Arc will now operate based on the updated settings.
Note: Some options may vary depending on your Sonos app version and supported features of your Sonos Arc model.