Apple PENCIL user manual

To work with an Apple Pencil, follow these steps:
1. Initially, ensure that your iPad model is compatible with the Apple Pencil. Currently, the Apple Pencil is compatible with iPad Pro 11-inch (1st and 2nd generation), iPad Pro 12.9-inch (3rd and 4th generation), iPad Air (4th generation), and iPad (8th and 7th generation).
2. Remove the cap from the back of the Apple Pencil.
3. Check if your Apple Pencil has an attached Lightning connector or if it's a newer second-generation Apple Pencil that attaches magnetically to your iPad.
4. If you have the Apple Pencil with a Lightning connector, connect it to the iPad's Lightning port. This will pair your Apple Pencil with your iPad and may prompt you for a pairing confirmation.
5. If you have the second-generation Apple Pencil (with magnetic attachment), simply attach it magnetically to the side of your iPad near the charging area. It will automatically pair with your iPad.
6. Once paired, your iPad will recognize the Apple Pencil, and you can start using it in compatible apps. You can now use the Apple Pencil to draw, write, annotate, or navigate your iPad.
7. Press the tip of the Apple Pencil against the iPad screen to write or draw. The pressure sensitivity allows for various line thicknesses and shading effects.
8. If your Apple Pencil supports gestures, you can double-tap on the pencil to perform specific actions. These actions can vary depending on the app you're using and can be customized in the iPad's Settings app.
9. To charge the first-generation Apple Pencil, remove the cap from its rear and connect it to your iPad's Lightning port. For the second-generation Apple Pencil, attach it magnetically to the iPad's charging area. The Apple Pencil will automatically start charging when attached.
10. You can check the battery level of your Apple Pencil in the Notification Center of your iPad. Swipe down from the top-right corner of the screen to access it.
Remember to note any additional instructions provided by app developers or specific apps that optimize the Apple Pencil's functionality.

To check the battery level of your Apple Pencil, you can follow these steps:
1. First, make sure your Apple Pencil is paired and connected with your iPad.
. On your iPad's Home screen, swipe down from the top-right corner to open the Control Center.
3. In the Control Center, find the Batteries section.
4. Within the Batteries section, you should see an icon for your Apple Pencil along with its current battery percentage.
If the battery percentage displayed is close to 100%, your Apple Pencil is fully charged.

No, the Apple Pencil does not need to be turned on or off. It is designed to be always ready for use and automatically turns on when you touch it to the screen of a compatible iPad. It also enters a low-power mode when not in use, so you don't need to worry about manually turning it off.