Apple AIRPODS-PRO user manual

To manually use your Apple AirPods Pro, you can follow these steps:
1. Put your AirPods Pro in the charging case and make sure they are charged.
2. Open the lid of the charging case.
3. On your iPhone or iPad, go to the Home screen and swipe down from the upper-right corner to access the Control Center. If you have an older iPhone with a home button, swipe up from the bottom of the screen to access the Control Center.
4. In the Control Center, tap on the "Bluetooth" icon to turn it on. Make sure Bluetooth is enabled on your device.
5. On the back of the charging case, there is a small button. Press and hold this button until the LED light on the front of the case starts flashing white.
6. On your iPhone or iPad, in the Bluetooth settings, your AirPods Pro should appear in the list of available devices. Tap on them to connect.
7. Once connected, you can now manually use your AirPods Pro for audio playback. You can play or pause music by tapping on the stem of either AirPod. To skip to the next track, double-tap on the stem of either AirPod. To go back to the previous track, triple-tap on the stem. You can also control the volume by adjusting it on your device or asking Siri to do it for you.
8. When you're finished using your AirPods Pro, put them back into the charging case to automatically disconnect and start charging.
Remember, to use certain features like Noise Cancellation or Transparency Mode, you might need to configure them in your iPhone or iPad settings by going to Settings > Bluetooth > AirPods Pro.

Yes, AirPods Pro have settings that can be adjusted. These settings can be accessed and modified through the settings menu of the device that you have paired your AirPods Pro with, such as an iPhone or an iPad. Some of the key settings for AirPods Pro include noise cancellation, transparency mode, and the ability to customize the touch controls on the earbuds.

The Apple AirPods Pro do not have physical buttons on their sides. Instead, they feature a pressure-sensitive force sensor on the stem of each earbud. This force sensor allows you to control various functions by pressing on it. You can press once to play or pause audio, twice to skip to the next track, three times to go to the previous track, and press and hold to switch between Active Noise Cancellation and Transparency mode.