Amana AGR5630BDS user manual

To reset your Amana electric stove (model: AGR5630BDS), you can follow these steps:
1. Start by disconnecting your stove from the power supply. This can be done by either unplugging it from the electrical outlet or turning off the circuit breaker that powers the stove.
. Leave it disconnected for approximately 2-3 minutes to ensure that any potential residual electrical charge is discharged.
3. Reconnect the stove to the power supply either by plugging it back into the outlet or turning on the circuit breaker.
4. Check the control panel of your Amana stove to confirm if it has been reset. The time display should be flashing or set to default values, and any previous settings or errors should be cleared.
5. Adjust the settings, date, and time as needed to personalize your preferences.
Note: If you're resetting the stove due to a specific issue or error, it's advisable to consult the user manual or contact Amana customer support for further guidance and troubleshooting.

To use the self-cleaning feature on your Amana Agr5630bds oven, follow these steps:
1. Remove all oven racks, pans, and any aluminum foil from inside the oven. These items should not be left inside during the cleaning cycle.
2. Close the oven door properly to ensure it is securely locked.
3. Select the self-clean cycle by pressing the "Self Clean" button on the oven's control panel. The oven will automatically lock the door, and the "Lock" indicator light will turn on.
4. Set the cleaning duration using the "Up" and "Down" arrow keys. The default cleaning time is typically 3 hours, but you can adjust it based on the level of dirt and grime in the oven.
5. Press the "Start" button to begin the self-cleaning cycle. The display will show the oven's interior temperature climbing and the time remaining for the cleaning process. The oven will become very hot during this time, and the "Lock" indicator light will remain on until the oven cools down.
6. Once the self-clean cycle is complete and the oven has cooled down, the door will unlock automatically. You can open the door and wipe away any remaining ash using a damp cloth or sponge.
Note: It is normal for smoke to be produced during the self-cleaning process, as any residues inside the oven are burned away. Ensure the area is well-ventilated by opening windows or using a kitchen exhaust fan.
It's important to carefully read and follow the instructions in your oven's user manual, as some models may have slightly different self-cleaning procedures.

There could be several reasons why your Amana electric oven is not working. It is important to troubleshoot the issue to determine the exact cause. Here are a few common problems that could be responsible:
1. Power supply issues: Ensure that the oven is properly connected to a working power outlet. Check if there are any blown fuses or tripped circuit breakers in the electrical panel.
2. Control panel malfunction: If the control panel is not responding or displaying any error codes, it could indicate a malfunctioning control board. Resetting the control panel or power cycling the oven may help resolve the issue.
3. Oven Temperature Sensor: The oven temperature sensor plays a crucial role in regulating the oven's temperature. If it is faulty, the oven may not heat properly or at all. Consider checking the sensor using an ohmmeter and replacing it if required.
4. Heating element issues: The heating element in an electric oven can sometimes wear out or break. If this happens, the oven will not heat properly. Check the element for any visible damage and replace it if necessary.
5. Faulty bake or broil element relay: The bake or broil element relay on the control board may be defective, preventing the element from heating. A professional technician may need to examine and replace the faulty relay.
If troubleshooting the above aspects does not solve the issue, it is recommended to contact a qualified technician or the Amana customer support for further diagnosis and repair.