Altec Lansing BABY-BOOM user manual

There could be several reasons why your Altec Lansing speaker is not working. Here are a few troubleshooting steps you can try:
1. Make sure the speaker is properly connected to your device. Check all cables and ensure they are securely plugged in.
2. Confirm that the speaker is powered on. Some speakers have a power button or switch that needs to be turned on.
3. Check the volume levels on both your device and the speaker. Ensure that the volume is turned up and not muted.
4. Test the speaker with a different device or audio source. This will help determine if the issue is with the speaker or the original device.
5. If the speaker has a built-in battery, ensure that it is charged. If it's a wired speaker, try using a different power outlet or USB port.
6. If none of the above steps work, try resetting the speaker to its default settings. Refer to the user manual or the manufacturer's website for instructions on how to do this.
7. If the speaker is still not working, it may be a hardware issue. Consider contacting Altec Lansing customer support for further assistance or consider getting the speaker repaired or replaced if it's under warranty.

To reset your Altec Lansing Baby Boom Bluetooth speaker, follow these steps:
1. Make sure the speaker is turned on.
. On the back of the speaker, locate the power button.
3. Press and hold the power button for about 10-15 seconds until you hear a tone or see the indicator lights flash.
4. Release the power button.
5. The speaker will now be reset to its factory default settings.
Note: Resetting the Baby Boom speaker will remove any paired devices and reset all settings to the original factory settings.

To connect two Altec Lansing speakers together, you can follow the steps below:
1. Ensure that both speakers are charged and turned on.
2. On the first speaker (the one you want to be the primary speaker), press and hold the Bluetooth pairing button until the Bluetooth indicator starts flashing rapidly. This puts the speaker in pairing mode.
3. On the second speaker (the one you want to connect as the secondary speaker), press and hold the Bluetooth pairing button until it enters pairing mode as well.
4. On your device (e.g., smartphone or tablet), go to the Bluetooth settings and search for available devices. Both speakers should appear as separate devices to pair.
5. Select the primary speaker from the available devices list. It may have a specific name like "Altec Lansing Baby-Boom (Primary)" or similar, depending on the model.
6. After pairing with the primary speaker, select the second speaker from the list. Its name should be listed similarly to the primary speaker, but with a different number or name indicating it is the secondary speaker.
7. Once both speakers are connected to your device, they should automatically sync and play audio in stereo or party mode, depending on the speaker model and settings.
Note: Make sure that the speakers are within the Bluetooth range and that no other active Bluetooth connections interfere with the connection process.
If you encounter any issues, it's recommended to consult the user manual or contact the Altec Lansing customer support for further assistance.

The lights on an Altec Lansing speaker typically indicate different modes, statuses, or functions of the speaker. The exact meanings of the lights can vary depending on the model of the speaker. Some common light indicators found on Altec Lansing speakers include:
1. Power Indicator: This light usually indicates whether the speaker is turned on or off. It may be solid or flashing, with different colors representing different power states.
2. Bluetooth Indicator: This light usually indicates the Bluetooth pairing status. It may flash or change color when the speaker is in pairing mode, and then become a solid color when it is connected to a Bluetooth device.
3. Battery Indicator: This light is present on portable speakers and indicates the battery level. It may change color or flash when the battery is low or nearing depletion.
4. Aux/Line-in Indicator: If the speaker has an auxiliary or line-in port, there might be a light that indicates whether it is currently active or in use.
5. Sound Mode Indicator: Some speakers have different sound modes, such as indoor or outdoor mode. The light may change color or flash to indicate the currently selected sound mode.
It is important to refer to the specific user manual or documentation provided with your Altec Lansing speaker to understand the exact meanings of the lights for your particular model.