AKASO V50-PRO user manual

1. Download and Install the "iSmart DV" app from either the Google Play Store or Apple App Store, depending on your phone's operating system.
. Open the Wifi settings on your Akaso V50 Pro camera (this can typically be found under the 'setup' menu).
3. Enable Wifi on the camera, this will turn your camera into a Wifi hotspot. You should be able to see the SSID 'iCam-AKASO' and the password displayed on your camera screen.
4. Go to the Wifi settings on your phone and connect to the 'iCam-AKASO' hotspot using the password provided on your camera's screen.
5. Once connected, open up the 'iSmart DV' app on your phone. It should automatically detect your camera and will display a live feed and controls for your Akaso V50 Pro.
Remember to keep your camera and phone close to each other during the setup process to establish a stable connection. Also note that the connection process might be slightly different depending on the model of your phone and the version of its operating system. Check the user manual of your Akaso V50 Pro for any specific instructions if needed.

No, the Akaso V50 Pro does not have built-in Bluetooth connectivity.

To transfer photos from your Akaso V50 Pro to your computer, you can follow these steps:
1. Power off your Akaso V50 Pro and remove the micro SD card from the camera.
. Insert the micro SD card into a card reader or adapter.
3. Connect the card reader or adapter to your computer's USB port.
4. Your computer will detect the micro SD card as a removable storage device.
5. Open the file explorer on your computer and locate the removable storage device (the micro SD card).
6. Open the micro SD card and navigate to the folder where the photos are stored (typically, it will be inside a "DCIM" or "Photos" folder).
7. Select the photos you want to transfer by either dragging and dropping them to your preferred destination on your computer or by copying and pasting them to your desired folder.
8. Once the transfer is complete, safely eject the micro SD card from your computer.
9. Reinsert the micro SD card back into your Akaso V50 Pro camera.
That's it! You have successfully transferred your photos from your Akaso V50 Pro to your computer.

The Akaso V50 Pro has a 1100mAh rechargeable battery that allows for approximately 90 minutes of continuous recording at 1080p resolution. However, the actual battery life may vary depending on factors such as the usage of Wi-Fi and other settings.