AEG DEB331010M user manual

Setting the clock on an AEG oven may differ by the oven model. Here's a general way on how to set some AEG oven:
1. Step 1: Press the "-" and "+" buttons at the same time for a few seconds until the display starts blinking.
2. Step 2: Use the "+" or "-" buttons to set the current time. Forward count goes by pressing the "+", and reverse count goes with "-".
3. Step 3: After you've set the correct time, wait a few moments. The flashing on the display should stop, sealing your settings.
Note: Usually, when the power supply has been interrupted, the clock flashes to alert you to set the time.
Please refer to your user manual for more specific instructions on how to reset your specific AEG oven clock. If you're having trouble, don't hesitate to contact AEG's customer service.

To reset your AEG oven after a power cut, you can follow the steps below:
1. Make sure the oven is completely switched off and disconnected from the power supply.
2. Locate the circuit breaker or fuse box in your home and find the switch or fuse corresponding to the oven's power supply. Turn off the switch or remove the fuse.
3. Wait for a few minutes to ensure that all residual power is discharged from the oven.
4. After a few minutes, flip the circuit breaker switch back on or replace the fuse.
5. Reconnect the oven to the power supply and switch it on.
6. Check if the oven is functioning properly by setting the time, temperature, and running a test cycle.
If your oven still doesn't function correctly after following these steps, consult the instruction manual or contact AEG's customer support for further assistance.

There could be several reasons why your AEG oven is not working. Here are some possible causes:
1. Power supply: Ensure that the oven is receiving power by checking if the circuit breaker or fuse has tripped. If so, reset the breaker or replace the fuse.
2. Control panel/display: Check if the control panel or display is showing any error codes or messages. If it is, refer to the user manual to identify the issue and troubleshoot accordingly.
3. Time and settings: Make sure that the oven is set to the correct time, cooking mode, and temperature. Incorrect settings can prevent the oven from operating.
4. Door switch: Check if the door is properly closed and the door switch is not malfunctioning. Faulty door switches can prevent the oven from starting.
5. Heating element: If the oven is not heating up, the heating element might be faulty or burned out. In this case, it may need to be replaced.
6. Wiring or internal components: If none of the above issues are apparent, there could be internal wiring or component problems. In such cases, it is recommended to contact a professional repair technician or the manufacturer's customer support for assistance.
Remember to always refer to the AEG oven's user manual for specific troubleshooting steps and safety guidelines.