AEG COMPETENCE user manual

To set the time on your AEG Competence oven, you can follow these steps:
1. Locate the "Time" or "Clock" button on the control panel of the oven. It is usually labeled with the corresponding icon.
2. Press and hold the "Time" or "Clock" button until the time display starts flashing or a clock symbol appears on the panel.
3. Use the "+" and "-" buttons to adjust the hours and minutes. Depending on the model, these buttons may be separate or integrated with other functions.
4. Once you have set the desired time, wait for a few seconds or press the "Time" or "Clock" button again to confirm the setting.
5. The time is now set on your AEG Competence oven, and it should display the current time on the control panel.
If you still face difficulties or if the steps provided do not match your oven model, it is recommended to refer to the user manual specific to your AEG Competence oven for accurate instructions.

There could be several reasons why your AEG competence oven is not reaching the desired temperature. Here are a few possible explanations:
1. Temperature calibration: Your oven's thermostat may need to be recalibrated. Over time, the thermostat can become inaccurate or lose its calibration, causing the oven to heat to a lower temperature than intended. Contact a professional technician to adjust or replace the thermostat if needed.
2. Heating element issues: The oven's heating element may be faulty or damaged. If the element is not functioning properly, it may not reach the desired temperature. Inspect the heating element for any visible signs of damage or wear and tear. If there are any issues, the element may need to be replaced.
3. Sensor issues: Modern ovens often have temperature sensors that help regulate and maintain the desired temperature. If the sensor is malfunctioning or dirty, it may not be accurately reading the oven's temperature, causing it to heat incorrectly. Clean the sensor, and if the problem persists, consider calling a professional to inspect or replace it if necessary.
4. Oven door seal: Check the oven door seal for any gaps or damage. A broken or worn-out seal can cause heat to escape from the oven, preventing it from reaching higher temperatures. Replace the seal if needed.
5. Power supply issues: It's possible that there might be an issue with the power supply to the oven. Check if the oven is properly plugged in and receiving power. Test the outlet with another appliance to ensure it is functioning correctly. If there is an issue with the power supply, consult an electrician to address the problem.
If you have tried all these troubleshooting steps and the issue persists, it is advisable to contact a professional technician or the customer support of AEG for further assistance.