Epson AcuLaser F CX11N user manual

Summary of the content on the page No. 1

Setting Your AcuLaser CX11NF to Receive Setting Your AcuLaser CX11NF to Receive
Faxes Faxes
® ®
By default your Epson AcuLaser CX11NF is set to receive distinctive By default your Epson AcuLaser CX11NF is set to receive distinctive
ring pattern telephone calls. This may prevent the AcuLaser CX11NF ring pattern telephone calls. This may prevent the AcuLaser CX11NF
from receiving incoming faxes. from receiving incoming faxes.
If your AcuLaser CX11NF does not pick up a telephone or fax call, If

Summary of the content on the page No. 2

® Epson AcuLaser CX11N/CX11NF Packing Instructions If you need to ship the Aculaser CX11N/CX11NF, follow these steps to package it to prevent damage during transit: 1. Make sure the CX11N/CX11NF is turned on, then press the Setup button The Setup light turns on and the LCD screen displays Setup Mode for a few seconds, then changes to the Setup menu screen. 2. Use the u or d button to select Scan Settings, then press the r button. 3. Use the u or d button to select Carriage Lock, then press t

Summary of the content on the page No. 3

12. Turn off the CX11N/CX11NF and remove the following items: ■ Any loaded paper in the MP tray ■ Optional paper cassette unit (if installed; see the online User’s Guide for more information) ■ USB cable ■ Power cord 13. Use shipping tape to tape the scanner and supporting foam to the printer as shown: Caution: Foam Don’t forget to place the foam in-between the scanner and printer; otherwise, the scanner hinges may be damaged during shipping. 14. Place the CX11N/CX11NF in the original

Summary of the content on the page No. 4

15. Attach foam to the top corners of the CX11N/CX11NF as shown below: 16. Lower the top of the original box and attach the four white handles, turning them to the closed (locked) position. Then tape the top of the box closed with shipping tape. OPEN CLOSED © 2005 Epson America, Inc. 8/05

Summary of the content on the page No. 5

CPD-20616 Printed in XXXXXX XX.XX-XX XXX

Summary of the content on the page No. 6

faxforward.fm Page 1 Tuesday, February 28, 2006 2:39 PM ® Epson AcuLaser CX11NF Fax Forwarding Instructions You can set up your CX11NF to automatically forward any faxes it receives to another fax machine. Follow these steps to set up fax forwarding: 1. Press the Setup button. The Setup light turns on and the LCD screen displays Setup Mode for a few seconds, and then changes to the Setup menu. 2. Press the d button twice to select Fax Settings, then press the r button. 3. Press the d butt