Epson 1000 ICS user manual

Summary of the content on the page No. 1

Release the 5 Install the
2
Release the Install the
5
2
Transportation Lock Ink Cartridges
Transportation Lock
Ink Cartridges
Start
Start
1 Press the release button on the right side, then lift up the scanner, as shown. 1 Press the Operate button. The Operate light comes on and the
scanner carriage and print head move.
Here
Here
Operate button
2 Peel off the tape and remove the plastic piece from the front of the ink cartridge holders.
Remove the packing tape from the transportation

Summary of the content on the page No. 2

5 When you see this screen telling you to connect your EPSON 1000 ICS, make sure it is turned on, then remove the sticker from the USB port on the back. Connect the square end of the USB cable to your EPSON 1000 ICS’s USB port, then 6 Load Paper 8 Your First Scan Load Paper Your First Scan 6 8 connect the flat end of the cable to your computer’s USB port. 1 Place a stack of paper against the right side of the feeder. 1 Raise the document cover and place a photo