Summary of the content on the page No. 1
Contents
1. INSTRUCTIONS FOR USE ........................................................23
2. INSTRUCTIONS FOR DISPOSAL – OUR ENVIRONMENTAL
CARE ..........................................................................................24
3. SAFETY INSTRUCTIONS ..........................................................25
4. KNOW YOUR APPLIANCE ........................................................26
5. USING THE HOB........................................................................27
6.
Summary of the content on the page No. 2
Precautions for use 1. INSTRUCTIONS FOR USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE. IT MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE HOB. WE URGE YOU TO READ THIS MANUAL AND ALL THE INFORMATION IT CONTAINS CAREFULLY BEFORE USING THE APPLIANCE. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND CONFORMS TO THE EEC DIRECTIVES CURRENTLY IN FORCE. T
Summary of the content on the page No. 3
Instructions for disposal 2. INSTRUCTIONS FOR DISPOSAL – OUR ENVIRONMENTAL CARE Our product's packing is made of non-polluting materials, therefore compatible with the environment and recyclable. Please help by disposing of the packing correctly. Find the addresses of collection, recycling and disposal centres from your retailer or from the competent local organisations. Do not throw the packing or any part of it away. They can constitute a suffocation hazard for children, especially the plastic
Summary of the content on the page No. 4
Safety instructions 3. SAFETY INSTRUCTIONS REFER TO THE INSTALLATION INSTRUCTIONS FOR THE SAFETY REGULATIONS FOR ELECTRIC OR GAS APPLIANCES AND VENTILATION FUNCTIONS. IN YOUR INTERESTS AND FOR YOUR SAFETY IT HAS BEEN ESTABLISHED BY LAW THAT THE INSTALLATION AND SERVICING OF ALL ELECTRICAL APPLIANCES IS TO BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. OUR REGULAR INSTALLERS GUARANTEE A SATISFACTORY JOB. GAS OR ELECTRIC APPLIANCES MUST ALWAYS BE DISCONNECTED BY
Summary of the content on the page No. 5
Instructions for the User 4. KNOW YOUR APPLIANCE Auxiliary Burner (AUX) Semi-rapid Burner (SR) Rapid Burner (R) Ultra-rapid Burner (URP) 26
Summary of the content on the page No. 6
Instructions for the User 5. USING THE HOB 5.1 Gas hob Before lighting the hob burners, check that the flame-spreader crowns are correctly in place with their respective burner caps, making sure that the holes A in the flame-spreaders are aligned with the plugs and thermocouples. Before using the electric plates or the barbecue (if included) for the first time, pre-heat them to the maximum temperature long enough to burn off any manufacturing oily residues which could give the food a bad smell.
Summary of the content on the page No. 7
Instructions for the User 5.2 Practical tips for using the burners For better burner efficiency and to minimise gas consumption, use pans with a flat, smooth base and a lid that have a suitable size for the burner, thus avoiding that the flames reach the sides of the pan (see point "5.3 Pan diameters"). Once the contents come to the boil, turn down the flame far enough to prevent the liquid from boiling over. To prevent burns or damage to the hob during cooking, all pans or griddle plates must
Summary of the content on the page No. 8
Instructions for the User 6. CLEANING AND MAINTENANCE NEVER USE A JET OF STEAM FOR CLEANING THE APPLIANCE. Before performing any operations requiring access to powered parts, switch off the power supply to the appliance. 6.1 Cleaning stainless steel To keep stainless steel in good condition it should be cleaned regularly after use. Let it cool first. 6.1.1 Ordinary daily cleaning To clean and preserve the stainless steel surfaces, use only specific products that do not contain abrasives or chl
Summary of the content on the page No. 9
Instructions for the installer 7. INSTALLING THE APPLIANCE 7.1 Positioning This is a class 1 (B2) and 3 (A, B1)appliance. The following operation requires building and/or carpentry work, therefore it must be carried out by a skilled technician. Installation can be carried out on various materials such as masonry, metal, solid wood or plastic laminated wood as long as they are heat resistant (T 90°C). 7.2 Heights for type A installation (empty base) A DISTANCES A B C L H MINIMUM 866 mm 630 mm 50
Summary of the content on the page No. 10
Instructions for the installer 7.3 Heights for type B installation (full base) B 1 B 2 DISTANCES B C L H MINIMUM 630 mm 50 mm 904 mm 750 mm MAXIMUM 650 mm - - - 31
Summary of the content on the page No. 11
Instructions for the installer 7.3.1 Supporting base Make two openings in the rear part of the base as described in the figure below. The left opening must be used for gas connections, and the right one for electrical connections. Before securing the hob to the supporting base, make 4 holes 8mm in diameter at the indicated points through which the screws will pass that are to be secured into the rivets in the bottom part of the product. The interaxes of the holes and the dimensions of the openin
Summary of the content on the page No. 12
Instructions for the installer 7.4 Mounting for type A installations Once the hob is correctly positioned in its support, place the brackets (A) over the bottom part of the product (B). Attachment requires 2 brackets for each side of the hob. 1) Secure the brackets to the walls of the base by screwing the supplied screws through the appropriate holes (C). These operations will guarantee that the entire product is mounted in a stable way. 2) Important: for fixing the product, use the supplied b
Summary of the content on the page No. 13
Instructions for the installer 7.5 Mounting for type B installations Once the hob is correctly positioned on the supporting base, complete the mounting by tightening the product using the 4 supplied metric screws, by screwing them through the 8mm Ø holes made before installation. Make sure that the holes on the structure are centred with those on the bottom of the product. Important: other types of installation are possible if supervised by the manufacturer. Important: for fixing this product to
Summary of the content on the page No. 14
Instructions for the installer 7.6 Electrical connection Make sure that the voltage and capacity of the power line conform to the data shown on the plate located under the casing. Do not remove this plate for any reason. The appliance must be connected to earth in compliance with electrical system safety regulations. If a fixed connection is being used, fit the power line with an omnipolar circuit breaker with a contact opening gap equal to or greater than 3 mm, in an easily accessible position
Summary of the content on the page No. 15
Instructions for the installer 8. GAS CONNECTION Before installation, make sure that the local distribution conditions (nature and pressure of the gas) and the state of regulation of the appliance are compatible. To connect the hob to the gas supply a flexible connection B is required which will enable connection to the gas inlet of the top A. Always place a gasket C between the two connections (Fig.1) and tighten the components with a tightening torque of at most 10 Nm. Fig. 1 Connection to th
Summary of the content on the page No. 16
Instructions for the installer Installation with the flexible hose must be carried out so that the length of the piping does not exceed 2 metres fully extended; make sure that the hoses do not come into contact with moving parts and that they are not crushed in any way. 8.1 Connection to liquid gas Use a pressure regulator and make the connection on the gas cylinder following the guidelines established by the regulations in force. Make sure that the feed pressure complies with the values indicat
Summary of the content on the page No. 17
Instructions for the installer 9. ADAPTATION TO DIFFERENT TYPES OF GAS Before carrying out the following operations, disconnect the appliance from the electricity supply. The appliance is preset for natural gas G20 (2H) at a pressure of 20 mbar. In the case of operation with other types of gas the burner nozzles must be changed and the minimum flame adjusted on the gas taps. To change the nozzles, proceed as described below. 9.1 Replacement of nozzles on the hob 1 Extract the pan stands and remo
Summary of the content on the page No. 18
Instructions for the installer 9.2 Burner and nozzle characteristics table RATED HEATING Rapid LPG – G30/G31 28/37 mbar CAPACITY (KW) Nozzle Reduced By-pass Capacity Capacity diameter capacity 1/100 mm g/h G30 g/h G31 1/100 mm (W) Auxiliary (1) 1.05 50 30 400 76 75 Semi-rapid (2) 1.8 65 33 500 131 129 Rapid (3) 3 85 45 800 218 214 Ultra-rapid (4) 3.9 100 65 1600 284 279 RATED HEATING Burner NATURAL GAS – G20 20 mbar CAPACITY (KW) Nozzle diameter Reduced capacity 1/100 mm (W) Auxiliary (1)
Summary of the content on the page No. 19
Instructions for the installer 10. FINAL OPERATIONS FOR GAS APPLIANCES After making the adjustments described above, reassemble the appliance by following the instructions in point "9.1 Replacement of nozzles on the hob" in reverse order. After adjustment with a gas other than the preset one, replace the label on the casing of the appliance with the label corresponding to the new gas. This label can be obtained from the nearest Authorised Service Centre. 10.1 Adjusting the minimum for town and
