Summary of the content on the page No. 1
Electric Cooker
ESV5060W
MOFFAT
16011105/R3
Summary of the content on the page No. 2
CONTENTS Instructions for the User Instructions for the Installer Safety Advice Important Safety Information 2 17 Technical Data Description of the appliance 4 17 Electrical Connection Technical Features 5 18 Stability Bracket Using the appliance 6 19 - Using the oven 6 - Hints & Tips 8 - Using the Grill 9 - Using the Hob 10 Maintenance and Cleaning 12 Something Not Working 14 Service & Spare Parts 15 Customer Care 15 Guarantee Co
Summary of the content on the page No. 3
IMPORTANT SAFETY INFORMATION You MUST read these warnings carefully before installing or using the appliance. If you need assistance, contact our Customer Care Department on 08705 950950. Installation • Always ensure that the oven vent, which • This cooker must be installed by qualified is located at the centre back of the hob, personnel, according to the is left unobstructed to ensure ventilation manufacturer’s instructions and to the of the oven cavity. relevant British St
Summary of the content on the page No. 4
DESCRIPTION OF THE APPLIANCE Hob 1000 W 1500 W 3 2 4 1 2000 W 1000 W 1. Front left solid hotplate (Rapid) 2. Back left solid hotplate 3. Back right solid hotplate 4. Front right solid hotplate Control panel Model : ESV 5060 W rapid small normal small ESV 5060 W 16011105/R3 4
Summary of the content on the page No. 5
TECHNICAL FEATURES Free standing Class 1 Hob Front right 1000 W Back right 1500 W Front left 2000 W Back left 1000 W Oven 1750 W Oven Top element only 750 W Bottom element only 1000 W Grill 1500 W Dimensions Height to the hotplate 900 mm Width 500 mm Depth 600 mm This appliance complies with the following EEC Directives : 89/336 (Electromagnetical Compatibility Directive) and subsequent modifications, and 73/23 Low Voltage Directive, 93/68 (
Summary of the content on the page No. 6
USING THE APPLIANCE Before the First Use of the Cooker Remove all packaging both inside and outside of the cooker, before using it. Before first use, the oven should be heated without food. During this time, an unpleasant odour may be emitted. This is quite normal. 1 Remove the oven accessories and ensure all packaging has been removed. 2 Set the oven function control knob to MAX 3 Open a window for ventilation 4 Allow the oven to run empty f
Summary of the content on the page No. 7
Use This oven has four functions and they are: Conventional Cooking Top element only Bottom element only Grilling The symbol on the knob corresponds to the symbol on the control panel. Off “ 200º ” Maximum temperature for conventional oven. “ 50º ” Minimum temperature for conventional oven. • “Grill” Grill function (heat comes from the top element only). “Top” Heat comes from top element only. • “Bottom” Heat comes fr
Summary of the content on the page No. 8
Hints and Tips Condensation and steam The effects of dishes on cooking results When food is heated it produces steam in the Dishes and tins vary in their thickness, same way as a boiling kettle. The oven vents conductivity, colour, etc. which affects the way allow some of this steam to escape. However, they transmit heat to the food inside them. always stand back from the oven when opening the oven door to allow any build up of A Aluminium, earthenware, oven glassware steam
Summary of the content on the page No. 9
Using the Grill Grilling Always grill with the oven door open. This cooker is not supplied with a grill handle. When grilling, it is only the top element that is used. It is not necessary to preheat the grill. rd 1 Insert the meal on the 3 level. 2 Turn the knob on position grill. 3 Adjust the grid and pan position to allow for different thicknesses of food. Position the food close the grill for faster cooking and further away for gentler cooking.
Summary of the content on the page No. 10
Using the Hob The Hotplates To switch on a hotplate, turn the relevant control knob to the required heat setting. The control knob is numbered 1 – 3 with seven positions. 0 - OFF • - Minimum 3 - Maximum. The hob has two types of hotplates: Rapid Hotplate (Front left) The rapid hotplates will heat up more quickly than a normal plate. Normal Hotplates We recommend the plates are switched to maximum (3) for a short while to boost the plate, and then
Summary of the content on the page No. 11
Selecting the hotplate Above every knob there is a symbol for the corresponding hotplate. For good cooking results, always chose pans which properly fit the diameter of the hotplate used (see figs). Saucepans for use on solid plates should have several characteristics: • They should be fairly heavy duty • They should fit the heat area exactly, or be slightly larger for efficient use, NEVER smaller. • They should have a flat base to ensure good contact with the plate. This
Summary of the content on the page No. 12
MAINTENANCE AND CLEANING - Raise the door slightly and pull it straight The oven should be kept clean at all outwards away from the oven. The door times. A build-up of fats or other will come completely off. See picture 2. foodstuffs could result in a fire, - When replacing the door, locate it back into especially in the grill pan. the hinge holes. Pull it down fully and slip the Before cleaning, ensure all control rings off the claw-like hooks. knobs are in the OFF p
Summary of the content on the page No. 13
MAINTENANCE AND CLEANING Before any maintenance or cleaning can be carried out, you must DISCONNECT the cooker from the electricity supply. The Hob Top The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool. Regularly wipe over the hob top using a soft cloth well wrung out in warm water to which a little washing up liquid has been added. Avoid the use of the following: - household detergent and bleaches; - imp
Summary of the content on the page No. 14
SOMETHING NOT WORKING If the appliance is not working correctly, please carry out the following checks, before contacting your local Service Force Centre. IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is under guarantee. Symptoms Solutions • The hob hotplate does not heat up. • Check that the cooker is plugged in and the electrical connection is switc
Summary of the content on the page No. 15
SERVICE & SPARE PARTS If you require spare parts or an engineer contact your local Service Force Centre by telephoning: 08705 929929 Your call will be routed to the Service Centre covering your postcode area. Before calling out an engineer, please ensure you have read the details under the heading “Something Not Working” and have the model number and purchase date to hand. In-guarantee customers should ensure that the checks under the heading “Something Not Working” have been mad
Summary of the content on the page No. 16
GUARANTEE CONDITIONS Standard Guarantee Conditions We Moffat undertake that if, within 12 months of the date of the purchase, this Moffat appliance or any part thereof is proved to be defective by any reason only of faulty workmanship or materials, we will, at our option, repair or replace the same FREE OF ANY CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the gas and electricity supply stated on the rating pla
Summary of the content on the page No. 17
INSTRUCTIONS FOR THE INSTALLER Safety Advice a bathroom or shower room. This cooker must be installed in accordance The minimum distance combustible material can with the IEE Wiring Regulations (Current be fitted above the cooker in line with the edges Edition). of the cooker is 420 mm. If it is fitted below 420 Detailed recommendations are contained in the mm. a space of 50 mm. must be allowed from following British Standards Codes Of Practice: the edges of B.S. 6172/ B.S.
Summary of the content on the page No. 18
ELECTRICAL CONNECTIONS Any electrical work required to install this The cooker should be connected to a double hob should be carried out by a qualified pole switch with a minimum gap of 3 mm. electrician or competent person, in accordance between the switch contacts and of a type with the current regulations. suitable for the required load in compliance with the current electric regulations. The switch THIS COOKER MUST BE should be sited within 2m of the hob and be EARTHED. easi
Summary of the content on the page No. 19
STABILITY BRACKET To reduce the risk of the appliance tipping due to improper use or door loading, it must be securely installed using the stability bracket supplied. 1. Place the stability bracket on the floor as shown in figure 2. If there is no side wall, the dimension given as 0.5 cm will be the distance of the left / right side of the appliance to left / right of the stability bracket. If there is a side wall, the dimension given as 2.5 cm will be the distance of the left / rig
Summary of the content on the page No. 20
Moffat (Vanilla), 55-77 High Street, Slough, Berkshire, SL1 1DZ Customer Care telephone number… 08705 950950 16011105/R3
