Summary of the content on the page No. 1
user manual
Ceramic glass hob
EHS60210P
Summary of the content on the page No. 2
We were thinking of you when we made this product
Summary of the content on the page No. 3
electrolux 3 Welcome to the world of Electrolux Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable. You will find some examples on the cov- er in this manual. Please take a few min- utes to study this manual so that you can take advantage of the benefits of your new machine. We promise that it will p
Summary of the content on the page No. 4
4 electrolux contents Contents Safety instructions 5 Description of the Appliance 7 Operating the appliance 11 Tips on Cooking and Frying 22 Cleaning and Care 25 What to do if … 27 Disposal 29 Installation Instructions 30 Assembly 31 Guarantee/Customer Service 35 Service 38 The following symbols are used in this user information: 1 Warning! This must be read! Important advice for the safety of persons and information on avoiding damage to the appliance 3 General information and advice 2 Informa
Summary of the content on the page No. 5
safety instructions electrolux 5 General safety � The appliance may only be installed and connected by trained, registered service engineers. � Built-in appliances may only be used Safety instructions after they have built in to suitable built-in units and work surfaces that Please comply with these instructions. If meet standards. you do not, any damage resulting is not � In the event of faults with the appli- covered by the warranty. ance or damage to the glass ceramic Correct use (cr
Summary of the content on the page No. 6
6 electrolux safety instructions How to avoid damage to the appli- ance � The glass ceramic can be damaged by objects falling onto it. � The edge of the glass ceramic can be damaged by being knocked by the cookware. � Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the glass ceramic if pushed across the surface. � Objects that melt and things that boil over can burn onto the glass ceramic and should be removed straighta- way. � To avoid damaging cookware a
Summary of the content on the page No. 7
description of the appliance electrolux 7 Description of the Appliance Cooking surface layout Multi-purpose zone Single cooking zone 1500/2400W 1200W Triple cooking zone Control panel Single cooking zone 800/1600/2300W 1200W Control panel layout STOP+GO Cooking zone indicators Child lock Cooking zone switch Timer function with indicator with display with indicator Automatic Timer display Heat setting indicator warm-up Automatic Heat setting selection Triple cooking zone switch-off switch wit
Summary of the content on the page No. 8
8 electrolux description of the appliance Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic sig- nals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off To switch the appliance on and off Child lock Locking control panel for children Stop+Go To switch the Keep Warm setting on/off Cooking zone Off To switc
Summary of the content on the page No. 9
description of the appliance electrolux 9 Displays Display Description Residual heat Cooking zone is still hot Middle ring of triple-ring The middle ring of the triple-ring function function is on Outer ring of triple-ring func- The outer ring of the triple-ring function tion is on Outer ring of multi-purpose The outer ring of the multi-purpose function function is on + Fault Malfunction has occurred number Automatic switch off Switch off is active. Residual heat indicator Warning! R
Summary of the content on the page No. 10
10 electrolux description of the appliance Control bar You can set the heat setting and auto- matic warm-up function via the control panel. The heat setting indicator com- prises a row of lights. Operational readiness indica- tor for cooking zone Heat setting indicator Automatic warm-up indicator Automatic warm-up function Cooking zone Off Heat setting selection If the control bar is touched for longer than 6 seconds, a signal sounds and the appliance switches itself off.
Summary of the content on the page No. 11
operating the appliance electrolux 11 Operating the appliance Switching the appliance on and off Control panel Display To switch on Touch for 1 second lights up. The opera- tional readiness indicators of the indi- vidual cooking zones also light up. To switch off Touch for 1 second goes out. The opera- tional readiness indicators of the indi- vidual cooking zones also go out. After switching on, within approx. 10 seconds a heat setting or a func- tion must be set, otherwise the ap- pliance
Summary of the content on the page No. 12
12 electrolux operating the appliance Setting the heat setting The control bar is touched where the desired heat setting is positioned. The heat setting is shown in the display. Cor- rect to the left or the right, if necessary. Do not release before the desired heat setting is reached.
Summary of the content on the page No. 13
operating the appliance electrolux 13 Switching the outside ring on and off By switching the outside rings on or off, the effective heating surface can be matched to the size of the cookware. Before an outside ring can be switched on, the inside ring must be switched on. Triple cooking zone Sensor field Display Switch on the middle ring Touch for 1-2 seconds lights up Switch on the outer ring Touch for 1-2 seconds and light up Switch off the outer ring Touch for 1-2 seconds goes out S
Summary of the content on the page No. 14
14 electrolux operating the appliance Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the set- tings being changed e.g. by wiping over the panel with a cloth. Control panel Display To switch on Touch for 4 seconds lights up To switch off Touch for 4 seconds goes out When you switch the appliance off, the locking function is automatically switched off.
Summary of the content on the page No. 15
operating the appliance electrolux 15 Switching the STOP+GO func- tion on and off The STOP+GO function simultaneously switches all cooking zones that are switched on to the keep warm setting and then back to the heat setting that was previously set. Control panel Display To switch on Touch To switch off Touch heat setting that was previously set (not automatic warm up function) Timer functions are not stopped by STOP+GO. STOP+GO locks the whole control panel except the sensor field .
Summary of the content on the page No. 16
16 electrolux operating the appliance Using the automatic warm-up function All cooking zones are equipped with an automatic warm-up function. When set- ting a heat setting using the automatic warm-up function, the cooking zone switches to full power for a certain amount of time and then automatically switches back to the heat setting set. Step Control panel Display 1. Select warm-up setting display flashes 2. Select the desired heat setting between The desired heat setting is 1 and 8 d
Summary of the content on the page No. 17
operating the appliance electrolux 17 Using the child safety device The child safety device prevents unin- tentional use of the appliance. Switching on the child safety device Step Control panel Pilot light 1. Switch on appliance. (Do not set a lights up. The operational heat setting.) readiness indicators of the individual cooking zones light up. 2. Touch for 4 seconds over lights up The child safety device is switched on Overriding the child safety device The child safety device can be s
Summary of the content on the page No. 18
18 electrolux operating the appliance Using the timer Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes If a heat setting is set on this cook- ing zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. If a cooking zone is switched off, the timer function set is also switched
Summary of the content on the page No. 19
operating the appliance electrolux 19 Selecting a cooking zone Step Control panel Display 1. Touch TIMER once Pilot light of the first cooking zone flashes 2. Touch TIMER once Pilot light of the second cooking zone flashes 3. Touch TIMER once Pilot light of the third cooking zone flashes 4. Touch TIMER once Pilot light of the fourth cooking zone flashes If the pilot light is flashing more slowly, the heat setting can be set or modified. If other timer functions are set, after a few sec
Summary of the content on the page No. 20
20 electrolux operating the appliance Setting the time Step Control panel Indicator 1. Select TIMER cook- Pilot light for the cooking zone selected ing zone flashes 2. Touch or 00 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel Indicator 1. Select TIMER cook- Pilot light of cooking zone selected flashes ing zone faster Time remaining is displayed 2. Touch The time remaining
