Dacor RR30NIS user manual

Summary of the content on the page No. 1

RR30NS, RR30NFS, RR30NIS, RR30NIFS
Document # PG05-009 Revised 05/23/13 Page 1/5
®
Renaissance 30” Wide PLANNING
Electric Inductive Range GUIDE
Model Versions
arning w
Model Configuration Handle Type
• Observe all governing codes and ordinances during planning
Freestanding, Mounted on
RR30NS[-C]*
and installation. Contact your local building department for
(full size side panels) outside of door
further information.
Freestanding, Flush handle,
RR30NFS[-C]*
(full size side panels) inte

Summary of the content on the page No. 2

RR30NS, RR30NFS, RR30NIS, RR30NIFS Document # PG05-009 Revised 05/23/13 Page 2/5 Renaissance 30” Wide PLANNING Electric Inductive Range GUIDE Product Dimensions (cont.) 27 9/16” (70.0 cm) 27 9/16” (70.0 cm) 3/8” min. (1.0 cm) 3/8” min. (1.0 cm) flat countertop flat countertop Range trim resting Range trim resting overhang overhang on countertop on countertop ATKR30SR ATKR30SR Countertop Countertop Cabinet face trim kit trim kit Cabinet face installed installed Back of side panel rests again

Summary of the content on the page No. 3

RR30NS, RR30NFS, RR30NIS, RR30NIFS Document # PG05-009 Revised 05/23/13 Page 3/5 Renaissance 30” Wide PLANNING Electric Inductive Range GUIDE All tolerances +1/16” (+1.6 mm), -0 unless otherwise noted. ■ Failure to meet or exceed the maximum and minimum dimensions/clearances stated may result in a fire hazard. ■ The shaded area shown denotes the location of the electrical junction box/receptacle. This is the suggested location. For replacement purposes, the B location of the existing e

Summary of the content on the page No. 4

RR30NS, RR30NFS, RR30NIS, RR30NIFS Document # PG05-009 Revised 05/23/13 Page 4/5 Renaissance 30” Wide PLANNING Electric Inductive Range GUIDE Cabinet Cutouts for Self-r imming installation (Models rr 30niS and rr 30niFS Only) All tolerances +1/16” (+1.6 mm), -0 unless otherwise noted. Countertop Countertop height: 34 3/4” (88.3 cm) min. 1 5/8 (41.1 cm) 36 7/8” (93.7 cm) max. max. thickness Countertop thickness: 1 5/8” (4.1 cm) max. (see diagrams) ■ The self-rimming installation of the R

Summary of the content on the page No. 5

RR30NS, RR30NFS, RR30NIS, RR30NIFS Document # PG05-009 Revised 05/23/13 Page 5/5 Renaissance 30” Wide PLANNING Electric Inductive Range GUIDE Cabinet Cutouts for Self-r imming installation (Models rr 30niS and rr 30niFS Only) All tolerances +1/16” (+1.6 mm), -0 unless otherwise noted. Countertop Countertop height: 34 3/4” (88.3 cm) min. 1 5/8 (41.1 cm) 36 7/8” (93.7 cm) max. Countertop thickness: 1 5/8” (4.1 cm) max. max. thickness (see diagrams) ■ Trim kit PN ATKR30SR is required for pr