Blodgett DFG-100 user manual

User manual for the device Blodgett DFG-100

Device: Blodgett DFG-100
Category: Convection Oven
Manufacturer: Blodgett
Size: 1.34 MB
Added : 2/25/2014
Number of pages: 101
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Blodgett DFG-100. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Blodgett DFG-100.

For your convenience

If looking through the Blodgett DFG-100 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Blodgett DFG-100 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Blodgett DFG-100 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Blodgett DFG-100 User manual - Online PDF
Advertisement
« Page 1 of 101 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Blodgett DFG-100 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Blodgett DFG-100. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

DFG-100ANDDFG-200SERIES
CONVECTION OVEN
INSTALLATION -- OPERATION -- MAINTENANCE
LASÉRIEDFG-100ETDFG-200
FOURSÀCONVECTION
MANUEL D’INSTALLATION -- FONCTIONNEMENT -- ENTRETIEN
BLODGETTOVENCOMPANY
www.blodgett.com
44 Lakeside Avenue, Burlington, Vermont05401 USA Telephone (800) 331-5842, (802) 860-3700 Fax: (802)864-0183
PN 90055 Rev U(1/03)
E2003 --- G.S. Blodgett Corporation

Summary of the content on the page No. 2

IMPORTANT WARNING:IMPROPERINSTALLATION,ADJUSTMENT,ALTERATION,SERVICEOR MAINTENANCECANCAUSEPROPERTYDAMAGE,INJURYORDEATH.READTHE INSTALLATION,OPERATINGANDMAINTENANCEINSTRUCTIONSTHOROUGHLY BEFORE INSTALLING OR SERVICING THIS EQUIPMENT AVERTISSEMENT:UNEINSTALLATION,UNAJUSTEMENT,UNEALTÉRATION,UN SERVICEOUUNENTRETIENNONCONFORMEAUXNORMESPEUTCAUSERDES DOMMAGESÀLAPROPRIÉTE,DESBLESSURESOULAMORT.LISEZATTENTIVE- MENTLESDIRECTIVESD’INSTALLATION,D’OPÉRATIONETD’ENTRETIENAVANT DE FAIRE L’INSTALLATION OU L’ENTRE

Summary of the content on the page No. 3

THEREPUTATIONYOUCANCOUNTON UNERÉPUTATIONSURLAQUELLEVOUSPOUVEZCOMPTER Foroveracenturyandahalf,TheBlodgettOvenCompanyhasbeenbuilding ovensandnothingbutovens.We’vesettheindustry’squalitystandardforall kindsofovensforeveryfoodserviceoperationregardlessofsize,application orbudget. Infact, no oneoffers moremodels, sizes, and ovenapplications thanBlodgett;gasandelectric,full-size,half-size,countertopanddeck,con- vection, Cook’n Hold, Combi-Ovens andthe industry’shighest qualityPizza Ovenline.Formoreinf

Summary of the content on the page No. 4

Model/Modèl: Your Service Agency’s Address: Adressedevotreagencedeservice: Serial Number/Numéro de série: Your oven was installed by/ Installateur de votre four: Your oven’s installation was checked by/ Contrôleur de l’installation de votre four:

Summary of the content on the page No. 5

TableofContents/TabledesMatières Introduction Introduction Oven Description and Specifications .... 2 Description et Spécifications du Four.... 48 Oven Components.................... 3 Éléments du Four..................... 49 Installation Installation Delivery and Location ................. 4 Livraison et Implantation............... 50 Oven Assembly ...................... 5 Montage du Four ..................... 51 NSF Bolts .......................... 5 Boulons NSF ....................... 51 Leg

Summary of the content on the page No. 6

Introduction OvenDescriptionandSpecifications Cookinginaconvectionovendiffersfromcooking inaconventionaldeckorrangeovensinceheated air is constantly recirculated over the product by afaninanenclosedchamber.Themovingaircon- tinually stripsaway thelayer ofcool airsurround- ingtheproduct,quicklyallowingtheheattopene- trate. Theresultisahighquality product, cooked atalowertemperatureinashorteramountoftime. Blodgettconvectionovensrepresentthelatestad- vancement in energy efficiency, reliability, and

Summary of the content on the page No. 7

Introduction OvenComponents Combustion Cover --- provides access to the RackSupports --- hold oven racks. combustion compartment on gas ovens. BlowerWheelCover---locatedonthebackinteri- CombustionCompartment --- containscombus- or wall of the oven. Protects the blower wheel. tion burners on gas ovens. Blower Wheel --- spins to circulate hot air in the CombustionBurners --- provideheatto thebak- baking chamber. ing chamber on gas ovens. Convection Motor --- provides power to turn the Chain & Turn

Summary of the content on the page No. 8

Installation DeliveryandLocation DELIVERYAND INSPECTION Thefollowingclearancesmustbeavailableforser- vicing. All Blodgett ovens are shipped in containers to D Oven body sides --- 12” (30cm) preventdamage.Upondeliveryofyournewoven: D Oven body back --- 12” (30cm) D Inspecttheshippingcontainerforexternaldam- age.Anyevidenceofdamageshouldbenoted NOTE: Ongasmodels,routineservicingcanusu- onthedeliveryreceiptwhichmustbesignedby ally be accomplished within the limited the driver. movement provided by

Summary of the content on the page No. 9

Installation OvenAssembly NSFBOLTS 1. Locatethe5/16”boltsthatwereshippedwith the oven. Thesebolts arerequired byNSF toblock anyex- 2. InstalltheboltsasshowninFigure3. posedholeonthebackofanoven.Thisincludes: D anyunit,singleorstacked,withoutabackpanel. D any holes in stacked units not used formount- ing stacking brackets. DoubleStacked Units Units withoutBackPanels Figure 3 5

Summary of the content on the page No. 10

Installation OvenAssembly LEG ATTACHMENT CASTER ASSEMBLY 1. Pushtheovenontoaliftwiththebottomofthe NOTE: Install the locking casters on the front of oven down. theoven.Installthenon-lockingcasterson 2. Align the threaded stud in each leg with the the back of the oven. nut located inside each bottom corner of the NOTE: Use a gas hose restraint on all units with ovenframe.Turnthelegsclockwiseandtight- casters. See page 13. en to the nearest full turn. CastersforSingleandDoubleStackedOvens: 3. Alig

Summary of the content on the page No. 11

Installation OvenAssembly DOUBLESECTIONASSEMBLY 3. Attach the stacking brackets using the re- maining 5/16” bolts shipped with the ovens. NOTE: Oldstyleovensrefertounitswithpaintedex- 4. Drill a clearance hole for a 5/16” bolt in the posed rear angle. New style ovens refer to angleironoftheoldstyleoven.Usetheholes units with rear angle iron enclosed in steel. in the stacking brackets as a pilot. The following instructions apply to stacking two 5. Attach the stacking brackets to the old style new

Summary of the content on the page No. 12

Installation Ventilation Ongasmodelstheinstallationofaproperventila- CANOPY TYPEEXHAUST HOOD tionsystemcannotbeoveremphasized.Thissys- Amechanicallydriven,canopytypeexhausthood tem removes unwanted vapors and products of is the preferred method of ventilation. combustion from the operating area. Thehoodshouldbesizedtocompletelycoverthe This oven may be vented using either: equipmentplusanoverhangofatleast6”(15cm) D A mechanically driven, canopy type, exhaust on all sides not adjacent to a wall.

Summary of the content on the page No. 13

Installation Ventilation DIRECT FLUEARRANGEMENT Installing thedrafthood Whentheinstallationofamechanicallydrivenex- Ovensorderedfordirectventingaresuppliedwith hausthoodisimpracticaltheovenmaybevented a draft hood. Install the draft hood as follows: by a direct flue arrangement. 1. Place the draft hood over the flue connector. SeeFigure9. WARNING!! 2. Securebothendswiththesheetmetalscrews provided. It is essential that the direct flue be installedasfollows.Incorrectinstallation will result in un

Summary of the content on the page No. 14

Installation UtilityConnections --- StandardsandCodes THE INSTALLATION INSTRUCTIONS CON- U.S.and Canadianinstallations TAINED HEREIN ARE FOR THE USE OF QUALI- Installation must conform with local codes, or in FIEDINSTALLATIONANDSERVICEPERSONNEL theabsenceoflocalcodes, withthe NationalFuel ONLY. INSTALLATION OR SERVICE BY OTHER Gas Code, NFPA54/ANSI Z223.1---Latest Edition, THAN QUALIFIED PERSONNEL MAY RESULT IN the Natural Gas Installation Code CAN/CGA- DAMAGE TO THE OVEN AND/OR INJURY TO B149.1

Summary of the content on the page No. 15

Installation GasConnection GAS PIPING Maximum Capacity of Iron Pipe in Cubic Feet of Natural GasPerHour Aproperlysizedgassupplysystemisessentialfor (Pressure drop of 0.5 Inch W.C.) maximum oven performance. Piping should be sizedtoprovideasupplyofgassufficienttomeet Pip pe Nominal Size, Inches themaximumdemandofallappliancesontheline L Length h((fft)) 3/4” 1” 1-1/4” 1-1/2” 2” without loss of pressure at the equipment. 10 360 680 1400 2100 3950 Example: 20 250 465 950 1460 2750 NOTE: BTU values i

Summary of the content on the page No. 16

Installation GasConnection PRESSUREREGULATIONAND TESTING D Max --- the maximum pressure at which the manufacturer warrants the oven’s operation. DFG-100-3 ovens are rated at 55,000 BTU/Hr. Eachovenissuppliedwitharegulatortomaintain (16.2 kW) (58 MJ) per section. DFG-200-L ovens thepropergaspressure.Theregulatorisessen- areratedat60,000BTU/Hr.(17.6kW)(63MJ)per tial to the proper operation of the oven and section.Eachovenhasbeenadjustedatthefacto- shouldnotberemoved.Itispresettoprovidethe rytooper

Summary of the content on the page No. 17

Installation GasConnection GASHOSERESTRAINT WARNING!! If the oven is mounted on casters, a commercial If the restraint is disconnected for any flexibleconnectorwithaminimumof3/4”(1.9cm) reason it must be reconnected when the inside diameter must be used along with a quick oven is returned to its original position. connect device. The restraint, supplied with the oven, must be U.S.and Canadianinstallations used to limit the movement of the unit so that no strain is placed upon the flexible connec

Summary of the content on the page No. 18

Installation ElectricalConnection Wiring diagrams are located in the control WARNING!! compartment and on the back of the oven. This appliance is equipped with three This oven is supplied for connection to 115 volt pronggroundingtype plugfor your grounded circuits. The electric motor, indicator protection against shock hazard and lightsandrelatedswitchesareconnectedthrough shouldbepluggeddirectlyintoaproperly the6’ electricsupplycordfoundattherearofthe grounded three prong receptacle. DO oven. N

Summary of the content on the page No. 19

Installation InitialStartup The following is a check-list to be completed by ADJUSTMENTS ASSOCIATED WITH INITIAL qualified personnel prior to turning on the INSTALLATION applianceforthefirsttime. Eachoven,anditscomponentparts,havebeen j Open the manual shut-off valve at the rear of thoroughly tested and inspected priorto ship- the oven. ment. However, itis often necessary to further testoradjusttheovenaspartofa normaland j Remove the control panel and combustion properinstallation. These adjustm

Summary of the content on the page No. 20

Operation SafetyInformation THE INFORMATION CONTAINED IN THIS SEC- Whatto do in the eventof a power failure: TIONISPROVIDEDFORTHEUSEOFQUALIFIED D Turn all switches to off. OPERATINGPERSONNEL.QUALIFIEDOPERAT- D DO NOT attempt to operate the oven until the ING PERSONNEL ARE THOSE WHO HAVE power is restored. CAREFULLY READ THE INFORMATION CON- NOTE: Intheeventofashut-downofanykind,al- TAINED IN THIS MANUAL, ARE FAMILIAR WITH THE FUNCTIONS OF THE OVEN AND/OR HAVE lowafive(5)minuteshutoffperiodbefore


Alternative user manuals
# User manual Category Download
1 Blodgett BC-20G User manual Convection Oven 9
2 Blodgett CNVX-14 User manual Convection Oven 1
3 Blodgett Convection Steamers None User manual Convection Oven 1
4 Blodgett CONVEYOR OVEN MT1820E User manual Convection Oven 15
5 Blodgett KCO-25E User manual Convection Oven 10
6 Blodgett COMBI BC-142G User manual Convection Oven 19
7 Blodgett CN14E User manual Convection Oven 1
8 Blodgett DFG-50 User manual Convection Oven 16
9 Blodgett B14-G User manual Convection Oven 9
10 Blodgett CONVEYOR OVEN REPLACEMENT PARTS MT1828G User manual Convection Oven 12
11 Blodgett SHO-E User manual Convection Oven 13
12 Blodgett FA-100 User manual Convection Oven 44
13 Blodgett CNV14E User manual Convection Oven 6
14 Blodgett RE Series User manual Convection Oven 1
15 Blodgett SC-16DS User manual Convection Oven 3
16 Alto-Shaam Inc.767-SK/III User manual Convection Oven 14
17 AEG KB7100000 User manual Convection Oven 10
18 Alto-Shaam Inc.1000-TH/III User manual Convection Oven 1
19 Alto-Shaam PLATINUM ASC-2E User manual Convection Oven 1
20 AEG BE3013021 User manual Convection Oven 69