Revolabs Inc.2 user manual

Summary of the content on the page No. 1

®
Revolabs Solo™ Single-Channel – Polycom SoundStation 2 Setup Guide
NOTES AND CAUTIONS:


This setup guide will guide you through the steps needed to properly connect a
Revolabs Single-Channel device to a Polycom SoundStation 2 speakerphone.

1. Connecting the Cables
2. Configuring the SoundStation 2 speakerphone

Note: It is important to carefully follow these instructions in order and completely. Otherwise,
your Single-Channel System and/or the phone may not function properly.

Summary of the content on the page No. 2

Connecting the Cables CONNECTING A REVOLABS FUSION TO SOUNDSTATION 2 SPEAKERPHONE 1. Connect Single-Channel to SoundStation 2 Auxiliary Audio Port using Revolabs 2.5mm to RCA cable

Summary of the content on the page No. 3

Configuring the SoundStation 2 Speakerphone CONFIGURING THE AUDIO MENUS OF THE SOUNDSTATION 2 SPEAKERPHONE 1. Press MENU Button 2. Press SELECT (Checkmark) for Settings 3. Scroll down to AUX AUDIO then Press SELECT 4. Use Soft Keys Right to select WIRELESS MIC then press SAVE NOTES: 1. In this case, Revolabs only recommends using the wearable lapel microphone or using a third-party dynamic microphone with the Revolabs XLR adapter module. Please note that the volume levels of th