Summary of the content on the page No. 1
PX191
LCD Monitor
USER’S GUIDE
www.planar.com
Summary of the content on the page No. 2
Table of Contents Usage Notice Precautions ................................................................................. 2 Introduction About the Product ....................................................................... 3 Package Overview...................................................................... 4 Installation Product Overview ........................................................................ 5 Connecting the Display ...................................................
Summary of the content on the page No. 3
Usage Notice Warning- To prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Warning- Please do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, precautions and maintenance as recommended in this users manual to maximize the life of your unit. Do: q Turn off the product before cleaning. q Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface. q Use a soft cloth moistened with
Summary of the content on the page No. 4
Introduction About the Product Having a 19 flat panel screen with an active matrix, thin-film transistor (TFT) liquid crystal display (LCD) , this product also demonstrates following outstanding features: q Analog and Digital signal input q Active matrix TFT LCD technology q 1280 x 1024 addressable pixels q 19 diagonal screen size q 31.5 ~ 80 kHz horizontal scan q 56 ~ 75 Hz refresh rate q VESA wall mountable q Auto-adjustment q Multilingual OSD user controls q Adjustment stand design brings u
Summary of the content on the page No. 5
' ' 8>$ 8= 9 ?: @
49= ''
( $A;: '
Summary of the content on the page No. 6
Installation Product Overview u Front View LCD Display Panel Controls Stand u Rear View Kensington Lock Connector Ports DC VGA Input Digital Port Power-In English 5
Summary of the content on the page No. 7
VESA Mount on your monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface Standard which defines a physical mounting interface for flat panel monitors, and corresponding standards for flat panel monitor mounting devices, such as wall and table arms.The VESA mounting interface is located on the back of your monitor. To mount the monitor on a swing arm or other mounting fixture, follow the instruction included with the mounting fixture to be used. Slots 100mm VES
Summary of the content on the page No. 8
Connecting the Display (Figure 8.1) To setup this display, please refer to the following figure and procedures. 1. Be sure all equipments are off. 2. Connect the DC power cord to the power connector; plug one end of the AC power cord into the power adapter, and then the other end into an electrical outlet(u). 3. Connect the VGA signal cable from display VGA input connector to the 15-pin connector of your host computer and tighten the screws(v). 4. For the PC with DVI digital output: Connect the
Summary of the content on the page No. 9
Figure 8.1 VGA Power Adapter Cable & Power Cord DVI-D Cable English 8
Summary of the content on the page No. 10
Summary of the content on the page No. 11
User Controls Front Panel Controls No./ Icon Control Function MENU Menu button To pop up the OSD menus. SELECT/AUTO Select/Auto Select- To select the adjust- ment items from OSD menus. Auto-To activate the Auto Adjustment function to obtain an optimum image. Brightness Minus/Minus 1.Decreases the brightness of 3 the display image. 2.Decreases value of the adjustment items. Brightness Plus/Plus 1.Increases the brightness of 4 the display image. 2.Incre
Summary of the content on the page No. 12
How to Use the OSD Menus 1. Press the M button to pop up the on-screen menu and to select between the four Main Menus. 2. Choose the adjustment items by pressing the S button. 3. Adjust the value of the adjustment items by pressing the or - + button. 4. Once you dont operate the OSD menus after a pre-set time, the OSD menus will automatically disappear. English 11
Summary of the content on the page No. 13
On-Screen Display Menus First OSD Menu: 4 Auto-Adjustment Chooses this function to obtain an optimum image. 4 Contrast Adjusts the contrast of the display image. 4 Brightness Adjusts the brightness of the display image. 4 Horizontal Position Changes the horizontal position of the image. 4 Vertical Position Changes the vertical position of the image. 4 Clock Changes the display data frequency to match the frequency of your graphic card. When you are experiencing vertical flickerin
Summary of the content on the page No. 14
Second OSD Menu: 4 Display Mode Selects this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. 4 OSD Off-Time Adjusts the time period for OSD menu disappear. 4 Language Chooses the language you need. 4 Sharpness Adjust the sharpness of the image. 4 Reset Returns the display parameters of the current mode to its factory default settings. English 13
Summary of the content on the page No. 15
Third OSD Menu: 4 Input Select It allows you to select the type of signal. English 14
Summary of the content on the page No. 16
Fourth OSD Menu: 4 Color Setting Adjusts the color temperature. 4 Color Adjustment-Red It allows you to adjust the red color of the display. 4 Color Adjustment-Green It allows you to adjust the green color of the display. 4 Color Adjustment-Blue It allows you to adjust the blue color of the display. English 15
Summary of the content on the page No. 17
Appendices Troubleshooting If you are experiencing trouble with the LCD display, refer to the follows. If the problem persists, please contact your local dealer or our service center. Problem: No image appears on screen. Check that all the I/O and power connectors are correctly and 4 well connected as described in the Installation section. Make sure the pins of the connectors are not crooked or broken. 4 Problem: Partial image or incorrectly displayed the image. Check to see if the resolutio
Summary of the content on the page No. 18
Warning Signal Sometimes you probably will see the warning messages from this LCD screen. This means that the LCD display cannot exactly receive the signal from the computer graphic card. There are three kind of situations may happen.Please check with the connected cables or contact your local dealer for more information. 4No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphic card. Check all the power switches,
Summary of the content on the page No. 19
Product Dimensions 417.78mm/16.45 508.74mm/20.03 Front View 59mm/2.32 Side View 215.40mm/8.48 Top View English 18
Summary of the content on the page No. 20
Compatibility Modes Mn odeR) esolutioF) requency (Hz H. Frequency (kHz I0 BM VGA60 40 x 35 75 31. I0 BM VGA60 40 x 40 75 31. I0 BM VGA60 40 x 48 65 31. I0 BM VGA70 20 x 40 75 31. V0 ESA VGA62 40 x 48 79 37. V0 ESA VGA65 40 x 48 75 37. V0 ESA SVGA86 00 x 60 52 35. V0 ESA SVGA80 00 x 60 69 37. V0 ESA SVGA82 00 x 60 71 48. V0 ESA SVGA85 00 x 60 79 46. V8 ESA XGA10 024 x 76 64 48. V8 ESA XGA10 024 x 76 75 56. V8 ESA XGA15 024 x 76 70 60. V4 ESA SXGA10 280 x 102 60 64. V4 ESA SXGA15 280 x 102 70 8 A0
