Summary of the content on the page No. 1
Summary of the content on the page No. 2
CONTENTS PRECAUTIONS 4 INTRODUCTION 9 About This Manual ···························································· 9 Package Contents: ···························································· 9 Controls & Connectors ··················································· 10 Front ···················································································· 10 Rear ····················································································· 10 1 INSTALLATION 11 1-1 Connecting th
Summary of the content on the page No. 3
Summary of the content on the page No. 4
Summary of the content on the page No. 5
WARNING E • If the monitor begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning monitor can be dangerous. • Do not dismantle the cabinet or modify the monitor. Dismantling the cabinet or modifying the monitor may result in electric shock or burn. • Keep small objects away from the monitor. Small objects may accidentally fall through the ventilation slots
Summary of the content on the page No. 6
• Use the enclosed power cord. If using the power cord other than the enclosed one, use the following cord. In USA and Canada, use a UL LISTED/CSA LABELED or CERTIFIED power cord set meeting the following specifications: * Rating: min. 125 V, 10 A * Length: max. 2.1 m * Type: SVT *Plug type:NEMA 5-15P, Parallel blade, Grounding type, 125 V, 10 A In Europe, use a proper European standard approved power cord meeting the following specifications: * Rating: min. 250 V, 10 A * Length: max. 2.1 m 2 *
Summary of the content on the page No. 7
• Handle with care when carrying the monitor Note that the monitor is heavier at the front than at the rear. E Do not move it alone. Always work with another person. The screen is optically coated to reduce glare. Keep hard OK objects (such as buttons, tie pins, and other clothing accessories) away from the screen surface to prevent scratches. • Set the monitor in an appropriate location. *Do not install in a dusty or humid environment. *Do not place in a location where light shines directly o
Summary of the content on the page No. 8
For users of the EIZO optional i·Sound™ sound unit and i·Station™ USB hub • When adjusting the viewing angle of the monitor, do not do so by handling the sound unit or USB hub. Adjusting the monitor in this way may break the unit or cause bodily injury. Others • Do not install the monitor within an area subject to strong magnetic fields (for example, in the vicinity of a speaker, except the optional i·Sound unit, or a high-voltage transformer). Magnetic fields can cause noise, image shaking,
Summary of the content on the page No. 9
Summary of the content on the page No. 10
Summary of the content on the page No. 11
Summary of the content on the page No. 12
4) Plug the power cord into the power connector at the rear of the monitor. Then plug the other end of the cord into a power outlet. WARNING • The equipment must be connected to a grounded main outlet. 5) Turn on the monitor power first, then switch on the PC power. The monitor’s power indicator (LED) will light up (green). The monitor will warm up briefly, then display an image. Whenever you finish your operation, turn off the PC and the monitor. • If an image does not appear, make sure that
Summary of the content on the page No. 13
E • The AUTO-SIZING function is intended for use on Macintosh, and IBM compatibles running Windows. It may not work properly if either of the following applies: - An AT-compatible PC running MS-DOS (not Windows). - The background color for the “wallpaper” or “desktop” pattern is set to black. • Some signals from the graphics board may not function properly. • A solid-color screen (i.e. red, green, blue) may appear for an instant while performing the AUTO-SIZING function, this phenomenon is not a
Summary of the content on the page No. 14
Connecting two PCs to the monitor 1) Be sure that the monitor and the PC are both switched off before connecting them. 2) Connect one PC to the monitor’s D-Sub connector and another to the BNC connector securely. The BNC connection should be made with an EIZO BNC cable, available as an option. Contact EIZO dealers for information about optional cables. (Example) MD-C53A (optional) Selecting the active input The BNC/D-Sub selection button on the front panel can be used to select either BNC or D
Summary of the content on the page No. 15
2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER 2-1 About ScreenManager E How to Use the ScreenManager Entering the ScreenManager Press the ENTER key to display the ScreenManager Main menu. Main menu Making the adjustments and settings 1) Select the desired icon using the Arrow keys, and then press the ENTER key to display the Sub menu. Sub menu 2) Use the Control pad (the four Arrow keys and the ENTER key) to make the required adjustments and settings. Save & exit 1) To return to the previous
Summary of the content on the page No. 16
ScreenManager Menus ScreenManager consists of a main menu and six sub menus: “Screen”, “Color”, “PowerManager”, “Others”, “Information” and “Language.” Animated icons on each menu allow for easy adjustment. Main menu • The menu message for the ScreenManager can be displayed in six languages: English, German, French, Italian, Spanish and Swedish. First, select the preferred language through the “Language” menu. This will become the default language when you use the ScreenManager. Sub menus Menu
Summary of the content on the page No. 17
Menus Functions Reference E Page 26 Power saving settings. Page 31 • Degaussing • Input-signal priority selection for two signal connections • Beep On/Off • ScreenManager menu position • ScreenManager menu contrast • Signal filter setting 1 • Signal filter setting 2 • Off Timer • Reset to defaults This menu shows the current ScreenManager settings. The menu contains four pages. Pressing the ENTER key displays the following information: • Page 1: Input port
Summary of the content on the page No. 18
Shortcut Keys Before entering the ScreenManager, brightness and contrast can be adjusted directly by moving the Control pad. To record the new setting and exit the ScreenManager, press the ENTER key. (The brightness and contrast functions are also available in the ScreenManager “Screen” menu.) See the diagram described below for adjustment directions. Brightness Up ENTER Contrast Contrast Down Up Brightness Down Adjustment Lock The ScreenManager operation can be disabled by holding down the A
Summary of the content on the page No. 19
2-2 Imaging Adjustment - Screen Menu - E All of the icons shown in the ScreenManager “Screen” menu are described below. • Allow the monitor to stabilize for at least 30 minutes before making image adjustments. Function Adjusts: a) Contrast Contrast/ b) Brightness Brightness · If you use the white text against a black background like DOS text, we recommend that you set the brightness to its maximum setting because a dark setting will result in eye strain due to high character contrast. Adjusts:
Summary of the content on the page No. 20
Function Parallelogram/ · Tilts: image sides to sides · Expands: top side/bottom side, shrinking the Trapezoidal other side Tilts: the image Tilt Adjusts: the uniformity Uniformity Adjusts: horizontal convergence Convergence Adjusts: vertical convergence What is convergence? Convergence is the monitor’s ability to precisely illuminate specific phosphors and line them up properly in order to produce pure color. • The convergence adjustment adjusts the entire screen. It is not possible to limit a
