Audiovox LCM4000 user manual

Summary of the content on the page No. 1

LCM-4000
4" Active Matrix LCD Monitor
Owner’s Manual

Summary of the content on the page No. 2

EXPLANATION OF GRAPHIC SYMBOLS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with the arrowhead within a triangle is intended to alert tell the user that parts inside the product are capable of producing an electric shock . The exclamation point within a triangle is intended to alert the user that important operating and s

Summary of the content on the page No. 3

SPECIFICATIONS 1. Type: Color Liquid Crystal Display (LCD) Monitor 2. Display Screen Size: 4 inches (82.1 x 61.8mm) ( W x H ) Element : TFT LCD Format : 480 (W) x 234 (H) dot Total 112,320 dot 3. Back Light: Cold Cathode Fluorescent Lamp 4. Power Source: +12 VDC 5. Power Consumption: 11W 6. Connection Terminals: Video/Audio Input Jacks (RCA) External Power Jack (DC IN 12V) IR Jack 7. Operating Temperature: 32°F - 104°F (0°C - 40°C) 8. Storage Temperature: -4°F - 176°F (-20°C - +80°C) 9. Cabinet

Summary of the content on the page No. 4

CONTROLS AND INDICATORS FRONT PANEL 1 2 3 4 5 6 1. Power On LED Indicator 2. Power On/Off Switch 3. Remote Control Sensor 4. Picture Select 5. On Screen Adjustment Up Button 6. On Screen Adjustment Down Button 4

Summary of the content on the page No. 5

REAR PANEL To Optional To IR Tansmitter IR Transmitter (Optional) Part Number IRT456 11 NOTE(B) 12 8 7 10 NOTE(A) 9 7. Power Input Connector: Red = +12 VDC Black = ground 8. Video Signal Input Connector 9. IR Repeater Connector 10. IR Repeater Transmitter 11. Audio Right Channel Input Connector 12. Audio Left Channel Input Connector 5

Summary of the content on the page No. 6

Note A : This cable (10) is utilized to connect to Video Cas- sette Players that do not accept the IR Repeater 1/8" (3.5mm) style plug (9). The IR Repeater Transmitter is provided with an adhesive that allows it to adhere to Video Cassette Player remote sensor. Remove the backing covering the adhesive and place the IR Re- peater Transmitter directly over the Video Cassette Player remote sensor. Note B : Connector (11) and (12) are Audio input Jacks reserved for optional IR Wireless Transmitter

Summary of the content on the page No. 7

GENERAL INSTALLATION INFORMATION 1. Installation will vary from vehicle to vehicle, as headrests in vehicles are not standard. 2. This unit is intended for installation by professional installers. 3. The kit consists of the screen assembly, a mounting hous- ing, key to remove screen from housing, wiring harness, remote control unit and remote control unit batteries. 4. To release screen from housing, slide the key on either the right or left side of the screen between the housing and screen ass

Summary of the content on the page No. 8

NOTE: A Remote Control Unit is included which will perform the Functions and adjustments of Operation items 3, 4, and 5 as well as additional features as noted below. REMOTE CONTROL FUNCTIONS: LCD/VCP: ........ Power button for LCD/VCP REPLAY: .......... Press to rewind tape and automatically go to play mode. PICTURE SEL: .On Screen Display (OSD) for color, tint, brightness, contrast. Use ± to adjust REW: ............... Rewinds tape FWD: ............... Fast Forward tape PLAY: ............... P