Summary of the content on the page No. 1
Coronis Fusion 10MP
User Guide
Summary of the content on the page No. 2
(This page intentionally left blank.) 2 Coronis Fusion 10MP
Summary of the content on the page No. 3
Welcome! Thank you for choosing this CORONIS FUSION 10MP display! Equipped with proprietary 'SmoothGray' technology for a meticulously rendered grayscale curve, the CORONIS FUSION 10MP display makes subtle details and lesions more noticeable than ever before. Add to this exceptionally high brightness and contrast levels, truly dark blacks and perfect geometry and you begin to understand that supreme grayscale precision has a new meaning. Thanks to the seamless 30-inch LCD screen, you can ea
Summary of the content on the page No. 4
(This page intentionally left blank.) 4 Coronis Fusion 10MP
Summary of the content on the page No. 5
Table of contents What's in the box.............................................................7 Parts, controls and connectors ........................................9 Front view ............................................................................................... 9 Rear view ..............................................................................................10 Display installation........................................................11 Removing the covers ..............
Summary of the content on the page No. 6
DPMS mode...........................................................................................30 Luminance target..................................................................................31 Viewing modes.....................................................................................31 Display functions...................................................................................32 Ambient Light Compensation (ALC)....................................................33 Readi
Summary of the content on the page No. 7
What's in the box Your CORONIS FUSION 10MP display comes with: • this CORONIS FUSION 10MP display guide • a system CD • two DVI cables • two DisplayPort cables • a USB cable • a set of AC power cords • an external power supply If you ordered a Barco display controller, it’s also in the box together with its accessories and dedicated user guide. Keep your original packaging. It is designed for this display and is the ideal protection during transport. Coronis Fusion 10MP 7
Summary of the content on the page No. 8
(This page intentionally left blank.) 8 Coronis Fusion 10MP
Summary of the content on the page No. 9
Parts, controls and connectors Front view 1 2 3 4 5 6 7 8 1 USB downstream connectors 2 Left/Up key 3 Right/Down key 4 Menu/Enter key 5 6 Stand-by/Cancel key Ambient light sensor 7 Power status indicator light 8 Control wheel Coronis Fusion 10MP 9
Summary of the content on the page No. 10
Rear view 1 2 3 4 5 6 7 8 9 10 11 12 1 USB downstream connector 2 USB upstream connector 3 4 Ethernet connector (see note DVI 1 video input below) 5 6 DisplayPort 1 video input Connector compartment cover 7 8 Neck cover Display stand cover 9 DisplayPort 2 video input 10 DVI 2 video input 11 +5 VDC, 0.5 A power output 12 +24 VDC power input The Ethernet connection is used for maintenance purposes and is not supported for user application. 10 Coronis Fusion 10MP
Summary of the content on the page No. 11
Display installation Prior to installing your CORONIS FUSION 10MP display and connecting all necessary cables, make sure to have a suitable display controller physically installed in your computer. If you are using a Barco display controller, please consult the user guide delivered with it to do this. Removing the covers CONNECTOR COMPARTMENT COVER The connector compartment cover should be removed to get access to the connectors. To remove the cover, proceed as follows: 1 Gently lift the cl
Summary of the content on the page No. 12
DISPLAY STAND COVER To get access to the cable routing channel, the display stand cover should be removed. This can be done as follows: 1 Gently press and hold the clips at the inside top of the cover. 2 Slide the cover upwards while holding the clips pressed. 12 Coronis Fusion 10MP
Summary of the content on the page No. 13
Unlocking the height mechanism In the factory, the height-positioning system in the display stand is locked with a red hook to prevent damage during transportation. You’ll have to remove this hook before adjusting your display height position. 1 While holding the display panel pushed down, pull out the red hook in the display stand. To retain the hook for possible future transportation, insert the short, red end of the hook back into the stand of your display. Coronis Fusion 10MP 13
Summary of the content on the page No. 14
Adjusting the display position Now that the height-positioning system of your display is unlocked, you can tilt, swivel, raise and lower the display as desired. Do not try to pivot your display when attached to the stand. Trying to do so could cause serious damage to your display and its stand. 14 Coronis Fusion 10MP
Summary of the content on the page No. 15
Connecting the signal cables 1 Connect one head of the display controller to the DVI 1 or DisplayPort 1 connector with one of the supplied DVI or DisplayPort cables. 2 Connect another head of the display controller to the DVI 2 or DisplayPort 2 connector with one of the supplied DVI or DisplayPort cables. Each side of your display can have a different video input connected (one side can have DVI connected while the other side has DisplayPort connected). Both display sides can have the sam
Summary of the content on the page No. 16
Connecting the power cables 1 Connect the supplied external DC power supply to the +24 VDC power input of your CORONIS FUSION 10MP display. 2 Plug the other end of the external DC power supply into a grounded power outlet by means of the proper power cord delivered in the packaging. Routing the cables Route all connected cables trough the cable routing channel in the stand of your display. The cable straps at the inside of the connector compartment allow you to fix the cables for better shi
Summary of the content on the page No. 17
Re-attaching the covers 1 Re-attach the display stand cover by sliding it downward. You’ll hear a “click” sound of the cover’s clips when the display stand cover is in position. Pay attention that all cables stay in the cable channel while replacing the cover. 2 Re-attach the connector compartment cover by sliding the cover’s top in position and then push the cover’s bottom. You’ll hear a “click” sound of the cover’s clips when the connector compartment cover is in position. Coronis Fusion
Summary of the content on the page No. 18
VESA-mount installation The panel, standard attached to a stand, is compatible with the VESA 100 mm standard. Thus, it can be used with an arm that is approved by VESA. This chapter shows you how to release the panel from the stand and how to attach it to an arm. If you’re not using an arm, you can skip this chapter. 1 Gently pull open both lower sides of the cover. 2 Slide the cover upwards while holding the lower sides pulled open. 18 Coronis Fusion 10MP
Summary of the content on the page No. 19
3 Lift the plastic frame that covers the fixation of the panel to the stand. Turn it for 45 degrees to uncover the fixation screws. 4 Unscrew the four fixation screws fixing the panel to the stand. 5 Attach the panel firmly to the arm using 4 screws M4 x 10 mm. You should mount the panel in landscape position. Portrait position is not supported. Use an arm that can support a weight of at least 18 kg (39.68 lbs). Failure to do so could make the panel fall, causing serious injury to a child or
Summary of the content on the page No. 20
First time starting up You are now ready to start up your CORONIS FUSION 10MP display system for the first time. 1 Switch on your CORONIS FUSION 10MP display as described in “Stand-by switching” on page 24. 2 Turn on the computer connected to your display. If you have properly installed your display and display controller, the Windows start-up messages will appear once the boot procedure is finished. Your CORONIS FUSION 10MP display will be running in a basic video mode at a default refresh
